DPI logging?
Is there currently a way to include DPI information in logs (i.e. firewall logs)? It would be really handy to have that additional information logged. As far as I can see, the only way would be to...
View ArticleERL tag outbound WAN traffic with DSCP value
I'm testing some ethernet-based branch connections. I'm using a traffic shaping policy on an ERL to proitize traffic being sent out the WAN (eth0) port of this test router (mainly to protect voice and...
View ArticleL2TP VPN not working after 1.9.0 Upgrade
HI guys I recently upgraded the system image on ER-Lite from 1.8.5 to 1.9.0. The thing is: when any client on Windows connects to Router using L2TP VPN, just have access to router (192.168.10.1 in this...
View ArticleERX 1.9 L2TP (no load balance)
I cannot get the L2TP/IPsec VPN working under 1.9. I'm testing with iOS 9. Sometimes when I'm already on the network over WiFi I can connect, but even that is sporadic. My ISP says they aren't blocking...
View ArticleBlock Streaming Media Sites without affecting the Traffic of Google
Hi For starters, i had this issue of Google Drive / Docs (mainly) not loading properly for most of the users. After unblocking the Streaming Media category, the problem got solved. You can see the...
View Articlebfd not revoking static route when loss of bfd signal
Hi, we use bfd on static routes between juniper (both EX and MX) and ER-pro (1.8 en 1.9 tested). When we shutdown the interface on the MX, the route on the ER disapears (like expected). When we cut an...
View ArticleEdgerouter Lite - Site to Site IPSEC Site not working
Hello.. I need some help....I am working on replacing several small sites that are using various Netgear Prosafes with Edgerouter Lites and running into an issue with IPSEC site to site VPN not...
View ArticleBrand new EdgeLite ER-3 won't accept software upgrade
I have a new ERL-3 installed on 8/31/16. I configured it for a firewall and it works but the software version is 1.2. I attempted (multiple times) to use the GUI to update it but it gets to about 90%...
View Article2 networks in one link EPR6
Hi, I have a new site where there's a lot of noise, so I'm trying to be efficient with the spectrum, I have in one side 2 ERPOE and 2 links to the new site, each link it's connected to a sector Antena,...
View Articleactive/active failover - sync configuration, automatic dis-/enable services
Hi everybody, unfortunatly I didn't find anything regarding this topic. Perhaps one of you can help me.We have several EdgeRouter in action. As they are our firewall and gateway solution, we set them...
View ArticleTaking image of ER USB drive while installed
Hello, Is there any way to image an ERLite / ERPOE's USB drive without removing it from the router? Ideally, create an image file in the drive's free space (of which there is plenty). Once created,...
View ArticleEdgePoint routing issue maybe?
The setup we are having trouble with is as follows Mikrotik Router - 10.100.0.1V Ethernet Connected ToRocket M5 - 10.100.0.7V Wireless Bridge, WDS EnabledRocket M5 - 10.100.0.8V Ethernet Connected...
View ArticleEdge Router Pro never reboots without hanging on all firmware versions
EDIT: See log files in post below. Since I have gotten my Edge Router Pro last December, 75% of the time I software reboot/shutdown/power cycle it never comes back up fully without an issue. I don't...
View ArticleERPRO L2TP RDP - 2 WAN - NO INTERNET - etc
Ok per I am opening my own thread. I am easily a novice at this stuff. But I finally got things where I thought they would work and I have multiple issues. 1. No internet connectivity with both WANs...
View ArticleΕΡ-Χ i cant access the router from wan
I have installed 2 edgerouter EP-X on in my net.The only setting i have made is turning eth0 into wan and the other ports into lan.the problem is i can't access the routers from wan port but i can in...
View ArticleIPSec VPN sort of not passing traffic, Sonicwall to ER8
Replacing one end of a Sonicwall to Sonicwall IPSec VPN with an ER-8 with v1.9.0. So new setup is remote Sonicwall to local EdgeRouter ER8. Creating the VPN via the GUI allowed the tunnel to come up,...
View ArticleIn what order are filter rules in advanced queue configurations processed?
Hi, I've posted this kind of question in one of my advanced queue threads, but I need to go more deep and it needs to be really clear to me: In what order are the filter matches processed in the...
View ArticleIPv6 VPN
Hi, To keep it short, I have an ERLite-3 with a PPTP tunnel client for special traffic. Since routing all traffic through it would be undesirable, only hosts connected to an internal L2TP VPN are NATed...
View ArticleCommunication between subnets
My ER-3 is setup as follows: eth0 - 192.168.1.0/24 - LANeth1 - 192.168.2.0/24 - GUEST LANeth2 - WAN My WAN cable router comes with it's own built in WIFI and DHCP server. It also happens to be in a...
View ArticleEdgeMAX - Set traffic policies for upload and download
On the EdgeMAX Routers, is it possible to set different clients and set a custom bandwidth range for each? Is this also possible in AirOS?
View Article