SNMP monitoring - counter update frequency and value wrapping
Hi, Having switched the last of my Cisco routers out for an ERL, I am in the process of moving my geeky custom Raspberry Pi based live traffic speed LED monitor over. (video of it in action here if...
View ArticleInternet Rule
Hello, i make a internet rule like this but my client at eth1 192.168.88.10 cant no connect to the internet name Wan_out { default-action drop description "" rule 1 {...
View ArticleERL Namecheap DDNS Config with PPPoE WAN Interface
I recently configured my ERL WAN Interface as a PPPoE and connected it to the carrier modem (Fiber to Ethernet) directly. Here is a config to update the DDNS for Namecheap Replace including < >...
View ArticleSlow ipsec troughput with offload enabled
Hello, I did some very simple tests between my edgerouter lite and a mikrotik x86 server on the other side. My edgerouter lite has a 500/500 fiber link. Mikrotik is gigabit connection. I have...
View ArticleHow to achieve this with EdgeRouter X and Pro ?
Lets say, you have 10 wireless towers in a city connected over L2 network path converging to your central office EdgeSwitch and then to EdgeRouter PRO which is currently acting as a central PPPoE...
View Articleedgepoe -5 with ac pro and outdoor +
setup was done on :off the grid farm. -power is by solar or generator. -Internet souce is by satillite. There is no cell reception or spotty.edge router poe 5, ac pro, outdoor + set it up edge poe is...
View ArticleEdgeRouter X not connecting to modem
Hello. I am having a problem setting up my new EdgeRouter X. I am using Windows 10 and I have Verizon Fios as my ISP. I first connected eth0 to my computer Ethernet port and set my computer IP to...
View ArticleEdgemax CLI Reference Manual
I'm sure this has been discussed somewhere I just cannot find it. Is there a comprehensive manual for all CLI commands and description of what they do anywhere on the Internet? I know, I'm a nerd,...
View ArticlePort 80 forwarding to 443
Hello, I have been reading some of the documentation and other post on this but I'm not sure I'm doing this correctly. I want to open port 80 on my edge router so I can access some web pages outside of...
View ArticleEdgeRouter X SFP - problem with config
Hi to allI have EdgeRouter X SFP with firmware 1.8.5 and I need to config samo special config but I can not.So1.My eht0 is WAN local network comming with 5 real IP. example my gateway is...
View ArticleWhat settings do I use with Smart Queue QoS for satellite connection with...
Will Smart Queue QoS (fq_codel) work with a satellite connection with its slow latency and slow throughput? What are the settings to make it work? Can both download and upload be enabled? Has anyone...
View ArticleClik here to view.
Horrible BGP Performance
Hi, I have been setting up a small network, at the moment there is 4 edgerouter pro's running OSPF with one eBGP peer with full routes, there are more peers to be added shortly. If I run firmware <=...
View ArticleFeature add conntrack connections to snmp
Hey guys Can we please add conntrack information to snmp data please? Ive had my edgerouters in front of my cloud platform go down twice in a week due to conntrack table filling up. It would be nice to...
View ArticleVOIP dropped connections
I've installed a EgeRouter Pro this weekend at our office. We have a pretty simple setup, the main thing the router has to do is loadbalance/fail over our two WAN connections as we extensively use RDP...
View ArticleClik here to view.
Create VPN Client and pass it as VLAN
I want to set up an EdgeRouter with two [PPTP or L2TP] VPN connections to different servers and be the gateway to my network but pass those connections to the network via VLANs. Say, an L2TP connection...
View ArticleEdge router 5port poe setup for dual wan failover
hi! to all expert there. Im newbie to setup this edge router. and im using the 5port poe router.Sombody if could create for a complete script for this scenario Lets label eth0 as wan port 1Eth0 = ip...
View ArticleWhat does "set vpn ipsec nat-networks allowed-network" do? Also ISP detection...
I followed the L2TP setup and successfully set a VPN server. However I don't quite understand the command set vpn ipsec nat-networks allowed-network 10.0.0.0/8 set vpn ipsec nat-networks...
View ArticleWAN Failover requires unplugging cable to trigger--watchdog seems innefective
I have had my WAN load-balancing and failover working well for close to a year now. However all my testing required me to unplug one WAN or the other to simulate a failure. Last night a strong wind...
View ArticleSite to Site IPSec issues between different versions
Greetings,We have quite a few VPNs up and running succesfullybetween different customers across a private wireless network on EdgeRouters and cross platform. The issue we are running into now is...
View ArticleEdgeRouter Lite problem
Network: Network A 192.168.33.1 = EdgeRouterPro ---> 192.168.33.10 = PowerBeam AP (bridge) -> 192.168.33.20 PowerBeam ST (Bridge) ---> 192.168.33.30 PowerBeam AP2(bridge) ---> 192.168.33.40...
View Article