Clik here to view.
Need help with IPSEC firewall rules
So here is my situation: Site AEdgeRouter XLAN: 192.168.1.1 / 24WAN: some public ip Site BFortigateLAN 10.1.0.0/24WAN: another public IP I currently have the IPSEC tunnel phase 1 and phase 2 up and...
View ArticleClik here to view.
Two Gateways, One Normal, One Tunneled VPN
Hi All, SUMMARY: I would like one gateway that connects to the normal internet and another gateway that forwards all traffic over a VPN. I have an EdgeMax Router running EdgeRouter X v1.8.0. The...
View ArticleDisabled interfaces still work
A bit of an odd thing. When I disable an interface on my EdgerouterX-SFP (1.85), it still works. I try both via shell using 'set interfaces ethernet eth4 disable' or via the web gui, but in both cases...
View ArticleI would Like to set up 3 openvpn sites in site-to-site mode Is this possible?
I have two sites (site 1 erlite, site 2 er poe) working perfectly with openvpn on vtun0. I am trying to set up a third site (with ERPOE) to connect with my site 1 (er lite) via a vtun1. Each site has...
View ArticleClik here to view.
IPSec Tunnel Problem: ER-PoE5 PFSense
Hi Team, I have managed to get an IPSec tunnel up between my ER-PoE5, (1.8.5) and a PFSense Router (2.2.4). I am very close to having it working, but have a small issue with the PFSense side (LAN). On...
View ArticleCross Compiling Tool-Chain
For the Edgerouter Lite: which tool-chain is currently being used by the team to compile for firmware 1.8.5?
View ArticleCan't get traffic on site to site VPN
Hi, I have been able to establish the link between my two sites but I am not able to reach my devices fromone side to the other:-( I have read as much as I could on the topic, tried ot build the right...
View ArticleComplicated routing issue
Hey all, I have a slighty complciated routing issue I'm trying to solve. I have a fiber provider that terminates over ethernet, no problem, we have two ER boxes hooked up with a switch and some vlans....
View ArticleRainy day, reviewing config, don't understand how this can work
Help! But not urgent help. Its a rainy day, and I'm studying an Edgeos router config to better understand how things are woring. That, and change the HTTPS port, since I currently 443 to be forwarded...
View ArticleERPOE-5 VLANs
Completely new to Ubiquiti and by no means versed at routers/switches/firewalls. I wanted to use the ERPOE-5 to create 3 VLANs (separate networks) and connect a UniFi but as I work with it, I am not...
View ArticleHelp With HughesNet
I have an automated house and the stream alot. They can not get a decent internet connection and we are stuck with HughesNet and a line of sight company called Airosurf. Both are really bad. When it...
View Articleoffloaded VPN ERL?
What type of VPN server should if I want it offloaded on ERL (so it can push around 100Mbit)?I have followed this guide, but I only get 15Mbit and 100% CPU usage then.
View ArticleClik here to view.
Firewall Rules Edge Router Lige
HI, i habe create a firewall rulesee picture, but i can not ping form my adress 192.168.88.10 to xxx.10. can you help me
View ArticleEdgerouter Lite/EdgePoint Enable IP Routing?
Is there a commad to enable ip routing on the EdgePoint/EdgeRouter. I want to do simple routing without NAT. If i use Masq NAT it works but if i delete that i get no traffic forwarded. On the...
View ArticleYet another IPTV thread
Hi, new user and fresh Edgerouter Lite owner here. Setting it up was a breeze and overall it's working great, but I'm having trouble getting my ISP's IPTV service to work. I've read through every...
View ArticleIpsec tunnel to AWS: Clients can communicate, router cannot
I have a site (192.168.1.0/24) with an EdgeMAX router connecting to an AWS VPC (10.7.0.0/16) through IPSec tunnel set up with dynamic routing (BGP). The tunnel itself works: The clients on site can...
View ArticleHairpin NAT from VLAN1 to VLAN2 (I cannot access my webserver on VLAN2 from...
I started out trying to setup a Unifi Security Gateway to do this and gave up. Now I am using an EDGEROUTER LITE. I have 5 Public IP's. I have 15 Ring Central VOIP phones. They are on VLAN3 I have a...
View ArticleRoutes for DNS forwarding?
At the moment I have following configuration:interfaces { ...... ethernet eth2 { address 192.168.100.2/24 description WAN duplex full firewall { in { name WAN_IN } local { name WAN_LOCAL } } ip {...
View ArticleClik here to view.
DHCPv6, Prefix Delegation and fixed IPv6, howto
Hello dear IPv6 enthusiasts I read through many messages and I am still uncertain about the exact syntax or more the behaviour if IPv6 with DHCPv6-PD and fixed IP addresses. I found this...
View Article