Slow speeds with ER-POE
When connecting a computer directly to my modem, a simple speedtest test gives me around 900/470 consistently. When routing via my ProPOE, speeds are 500/300. I've read plenty of prior threads here and...
View Articlev1.9.0 l2tp remote access connects but cannot get to anything on LAN
Have L2TP for remote access setup. Remote client can connect, is getting addresses assigned, but cannot get to anything local on the LAN. Suggestions? config for L2TP.. l2tp {remote-access...
View ArticleUnable to manually set global DNS address
Recently redid my configuration to accommodate zone-based, however now I am unable to have my router provide DNS to subnets via assigned name-server. I can ping www.google.com from the console, which I...
View ArticleEdgeRouter Lite with AWS VPN Connection issues
Hello! I'm trying to get an AWS VPN connection set up with an EdgeRouter Lite. We have multiple locations that are all connected with each other with Meraki Firewalls using Site-to-site VPN. Each...
View ArticleFIX NEEDED: router boot time depends on network load
At least EdgeRouter POE boot time depends on amount of traffic very much.I have offload enabled:# show ubnt offloadIP offload module : loadedIPv4forwarding: enabledvlan : enabledpppoe : disabledgre :...
View Articleplink FATAL ERROR: Network error: Connection refused
I'm trying to capture traffic and dump it into wireshark for analsysis. But somehow i'm unable to connect to the edgemax router, it gives me the error message: FATAL ERROR: Network error: Connection...
View ArticleSquid Guard Functionality
Hi, I have got my network segmented into 2 LANs, one is for the kids and the other is for the adults but as my kids are very young I want to start monitoring the sites they are going to as my son has...
View ArticleEdgeMax Router Lite version 7 to 9
Can you go from v1.7.0 directly to v1.9.0? Or do I need to go to 8 or 8.5 first? Is 9 stable? Thanks!
View Articlebackup ER-3 and restore to ER-5
Hey all, quick question that I think will work as I expect...but wanted to be sure. I have a customer that has 3 WAN connections available to them now, and I want to use Primary and two failover. In...
View ArticleHigh CPU usage ER-pro
Hello All, I am running 1.7.0 and have been running quite well for a long time now. Today I logged in to the router and notice the CPU is taxed at 100% I have not yet tried to do a power cycle as the...
View ArticleLoad balancing Issue with EdgeMax 1.9
Have a 3 wan load balance on EdgeMax. Setup a EdgeMax Lite Router behind the EdgeMax. Loosing over 40% of packets and pinging address on Internet. Two routers have no issue pinging each other. A...
View ArticleFrustration with ER-5-poe
I've about had it with this router. I have a solar powered tower and this router is going to be the death of me! The router will work for a couple of months and then just lock up. When it starts...
View ArticleClik here to view.
Sharing a Printer Among All Interfaces
I have a home network that can almost be set up as flat, and I know EdgeRouter 8-port is an overkill in my situation (my old home-grade router died and got an ER-8 free from a family member , and as an...
View ArticleOpenVPN seems broken after 1.9.0 FW
Howdy, After upgrading to FW 1.9.0 on ERPOE my vtun interface appears to have dissappeared, and the router is no longer able to connect to the server. reset openvpn interface vtun0 Invalid interface...
View Articlednsmasq host-record behavior is annoying
From the changelog: When use-dnsmasq is enabled, the entries configured under "static-mapping" will be tralsnated to statically assigned A records in dnsmasq (using the dnsmasq host-record directive)....
View ArticleER-X As A Switch - VLAN Sanity Check
I'm pretty sure I have this set up correctly, but I wanted to be sure... My home network is set up as follows: Cable Modem ---> PoE Injector ---> ER-X (router) ---> ER-X (switch) --->...
View ArticleUse ER-X to test functions for ER-8 or ER-8 Pro?
Hi,We're thinking of buying a couple of EdgeRouters, possibly even the ER-8 or ER-8 Pro models.Can we buy ER-X models and use them to test all the functions? Do they run the same software, with all...
View ArticleEdgeMAX 1.9.0, L2TP, and a broken GUI
Hello there,today I have been trying to setup an L2TP in an EdgeRouter X behind an ADSL line with a Dynamic IP. To make things simple and test if everything is working before moving to a "production"...
View ArticleWeb GUI Interface Port
Hi Guys. Before shooting me down in flames, I have spent hrs searching this forum for the answer, I have found loads of info, but no easy guide on how to fix. I want to be able to change my ERPOE-5 Web...
View ArticleHow to save the CA?
If I use the ./CA.sh -newca command to set a CA, and I move the ca-cert and ca-key files to /config/auth I believe they persist between firmware upgrades, is this correct? Further, how do I save, or...
View Article