Firewall settings EdgeRouter X using a bridge
I have multiple IP's from my ISP and an EdgeRouter X setup like thiseth0 is my ISP wan connectioneth1 is a 2nd router wan conection eth0 & eth1 on br0 (DHCP enabled)eth2, eth3 & eth4 are on...
View ArticleIs DPI data part of the syslogs?
I turned on debug level logging and sent my syslogs to splunk - I don't see anything that looks like DPI data - does anyone know if the DPI data is part of the data that gets output to splunk? Since...
View ArticleER-X 1.8.5 - Extra PPTP Route Added Automatically?
I'm new to VPN, managed to get a PPTP server working on my ER-X. I used this guide and then opened the PPTP and GRE ports on the firewall....
View Articlecustom static route
Hi, I have the following config: pppoe1 NAT masquerade -- with public ip 186.x.x.41pppoe2 NAT masquerade -- with public ip186.x.x.42 eth1.100 (is vlan for public ip 186.x.x.41) -- the local subnet is...
View ArticleRemote User VPN Edgeos 1.8.5 MacOS 10
So, EdgeOS uses PPTP for remote access for users, and as of MacOS 10 they have depreciated PPTP. To complicate things MacOS doesn't support OpenVPN natively, which seems to be the second option on...
View ArticleER-X openvpn client + normal network question
helloafter reading some manuals from network by glueing them i finally setup ER-X like that:-openvpn client connected to nordvpn provider + vpn killswitch (if vpn connection will drop er-x doesnt allow...
View ArticleCan the Edge Router Lite ( light up the Wan, Lan and Throughput) on the...
I was reading that the you dont need a USG and an EdgeRouter. I was wondering if the ERLite can light up the Functions in the Controller. Also, can the EdgeSwitch SFP get detected by the Controller?...
View ArticleHelp forwarding traffic to SOCKS5 Proxy
I'm needing to forward specific traffic from certain LAN IP address to a SOCKS5 Proxy forwarding service. I need this becuase I need to provide one permanent IP address (the SOCKS proxy) to my final...
View ArticleVoIP QoS over IPSEC VPN over PPPoE
Hi All, New to these devices but I have a fairly standard deployment that is using an internet connection between two sites and they wish to run a VPN over it for internal traffic as well as normal...
View ArticleVLAN offload
I'm trying to get my head round VLAN offloading on V1.9.0 of a ERPoe-5 router. I'm new to EdgeMAX -- and inially setup through the GUI, but don't mind using the CLI if I need to. I've got a local...
View ArticleER and haproxy
There are various topics discussed in previous threads about having some kind of reverse proxy / load balancer built into ER. I'd like to re-open that discussion. Currently we have, in production, a...
View ArticleEdgerouter pro DNS forward stops on dual Wan failover
Hey everyone, i need help with an edgrouter issue. Im new to edgerouter so forgive my ignorance on some of this. I have a dual wan setup. Wan 1 (eth0) is connected to DSL via pppoe. WAn 2 (eth2) is...
View ArticleEdgeOS QOS (Advanced Queue) Not Working
I have a Edgerouter X, with the following setup: eth0 as WAN, connected to my DSL modem (7.2 down 1.0 up)eth3 connected to a ethernet switch, with computers, printers, etc. connected (192.168.1.*)eth4...
View ArticleClik here to view.
ERPoE5 PPPoE missing IP
I playing around with my ERpoe5. by configuring PPPoE using wizard, i do receive pub ip address for my pppoe. since my ISP have pppoe that require usage of vlan of 500 for TM Unifi (malaysia). so, i...
View Article1.8.0 traffic analysis - ERL as router and not firewall
greetings, i have an issue with traffic analysis that i can't get to display any data at one site. i have traffic analysis successfully working at many other locations - all of these are running as...
View ArticleBGP - IPv6 no-activate
Hi, I'm using the 1.9.0 version with a EdgeRouter Pro 8 to establish some sessions bgp ipv6, but one of them is not working. After trying to use the "no-activate" without success, I decided to remove...
View ArticleEdge router POE Reboot issue
In May 2016, I purchased an Edge Router POE and was able to get it configure quickly and easily. It has been working terrific and haven't had any problems until recently. I put the router in my garage...
View ArticleBug Report: Severe memory leak in BGPD
Hello, I've noted a pretty serious memory leak in bgpd on EdgeOS 1.9.0 on an ER-Pro8 running with a full routes eBGP peer and a single full-routes iBGP link. The BGPd daemon consumes an increasing...
View ArticleEdge Router POE 5 Issue
I'm having a very strange issue with an edge router poe 5. I'm using eth0 for the wan in, and bridging eth1, 2, 3, 4. eth1 goes to my switch where all of my devices are hardwired (its a home automation...
View ArticleERLite-3 NAT hairpin not working?
I have a pretty basic configuration with a static public IP WAN on eth0 and a bridge LAN of eth1/eth2 (only eth1 being used). I have some port forwards created to allow access to my UniFi NVR from...
View Article