I playing around with my ERpoe5. by configuring PPPoE using wizard, i do receive pub ip address for my pppoe.
since my ISP have pppoe that require usage of vlan of 500 for TM Unifi (malaysia).
so, i using wizard to config it.. my ppoe is on eth1, so i use wan+2Lan. in the beggining, everythings fine, on dashboard, i have public ip on ppoe. then i create a vlan500 under eth1.
but when i configure port forwarding, WAN interface : pppoe ; LAN, i put other port. save it, then pub ip for pppoe on dashboard disappear.
return abck to port forwarding, wan interface shows : others : PPPoe
