ERX Lost config for the second time
I have an ERX that was configured with all ports on switch0 and POE-Passthrough is enabled. Basically functioning as a POE-Passthrough 5-port switch.The ERX is powered by a ES-24-250, and there is a...
View ArticleStatic route how to enter in my Edgerouter lite? So that those data won't...
Hello, How can I enter the below static IP addresses so that the data won't leave my Edge Router Lite?Thanks. IP: 8.8.8.8Subnet: 255.255.255.255 (or /32) IP: 8.8.4.4Subnet: 255.255.255.255 (or /32) IP:...
View ArticlePIA OpenVPN VLAN Routing
I would like to send all VLAN100 (10.10.10.0/24) through the vtun0 Open VPN. Could someone help? config is as below. firewall { all-ping enable broadcast-ping disable group { } ipv6-receive-redirects...
View Articlevlan dhcp
Hello, I set up dhcp on an interface, works fine. I get dhcp. If I set up a vlan on an interface and then set up dhcp for the ip/subnet of the vlan, dhcp does not work. I also can't connect to the...
View ArticleEdgerouter Lite 100mbit limit?
Hey I just picked up an AP AC Pro and Edgerouter lite, got it up and running, however i am unable to get speeds in excess of 100mbit of it, where as before i put in the edge i had 250mbit+ (my...
View ArticleIPv6 only PPPoE = FAIL
Hi all, I just bought an ERLite-3 and struggling to configure it for my home use.I use NTT services (in Japan), which uses two separate PPPoE sesions: one for IPv4 only, and the other for IPv6 only....
View Article4g Failover hardware options
We are starting to look into some sort of 4g failover options. We currently install ERL's at our customer's locations and setup 1 ISP into the location and everything is fine.But for people that want...
View ArticleCenturylink 1gig PPOE 6rdd IPV6 generation issue.
I was asked by suppor to post my problem here with IPV6v1.8 1TLDR is pppoe connects my centurylink and auto assigns a new IPv4 address each time.i'm using 6rd to use IPV6 but that tunnels throught...
View ArticleForwarding UDP ports for OpenVPN failing
Hi folks, I've had a successful meshnet of sorts going for some time now, with my edgerouter having several point to point OpenVPN connections to VyOS devices elsewhere in the world. They've been...
View ArticleLimiting an interface bandwidth
I need to limit a lan interface on an ER-8 to 10x1mbps. I see how to limit a specific IP address here:...
View Articleconntrack how I loathe you!
I've run into a few times lately the problem of conntrack filling up and the affected router stops forwarding packets. The thing is - there is no reason conntrack should ever be enabled on these...
View ArticleVLAN offload + VRRP seems to cause random reboots
I have a pair of ERL in a VRRP group doing VRRP for one physical interface and a number of VLANs. With VLAN offload enabled the primary unit will randomly reboot, sometimes under high traffic...
View ArticleHelp needed! Configure Edge Router Lite to allow only one EXTERNAL WAN ip to...
Hello UBNT Community. I have a ERL with a port forwarding rule to allow traffice for port 8081 to redirect to an internal IP on port 80. that works just fine. the issue i am having is dissalowing all...
View ArticleClik here to view.
QOS Rule to prevent Windows Update usage all bandwith
Windows 10, use all my bandwith conection in my EdgeRouter X. Sometimes wen a computer in my network is doing windows update freezes all my internet. I have 50Mbps conection and the windows update uses...
View ArticleEdgerouter Lite VLAN no internet
Hi all, i us unifi allmost everywhere, due to company policy we use sonicwall firewalls, and mostly HP switches / or unifi switches if POE is needed. i can dream the configuration by now to set this...
View ArticleNeed a simple EdgeRouter Lite-3 QoS configuration starting point
I have been reading all of the posts about QoS, and testing configuration options for weeks to learn how this works. But I must be missing some basic understanding because many of the things I try...
View ArticleWhy does Ubiquity not supply replacement usb sticks for the ERL?
There seem to be a large number of failures of the usb stick and in addition the list of usbsticks that work seems to be a shifting target.... Jerry
View ArticleIdea for Next Software Update - Failover Feature
Is it possible that the developers of the firmware of the edgemax router can include a feature in the next software version that would save alot of us time on cofiguration of dual wan setups? So here...
View ArticleCan't seem to get L2TP working on my ERPoE with v1.8
Hi, absolute newbie here trying to get started with my ERPoE here. I have v1.8 installed on it. I used the Load Balancing wizard with main WAN on eth0, failover WAN on eth1, and a single switch for...
View ArticlePBR for failover of multiple client mode OVPN tunnels?
I've got four (11, 12, 21, 22) vtun interfaces connecting to two VPN service providers and I would like to setup my ER-X to failover between them. I've attempted to do this with the PBR (VPN_SP_route)...
View Article