Hi all,
i us unifi allmost everywhere, due to company policy we use sonicwall firewalls, and mostly HP switches / or unifi switches if POE is needed.
i can dream the configuration by now to set this up.
at my home i started to test more ubiquiti stuff because i am loving unifi, and want to see what more they have to offer.
so is setup a ERLITE and a Toughswitch Pro and two unifi AC-LR accespoints.
i have setup the following on my ERLITE
ETH0 = internet
ETH1 = LAN (BR0, port mirror) 10.10.0.0/16
ETH2 = LAN (BR0, port mirror) 10.10.0.0/16
BR0.100 = VLAN Wifi Guest 172.16.100.0/32
BR0.200 = VLAN Wifi other services 172.16.200.0/32
services DHCP setup to serve the LAN or VLAN
| LAN_BR | 10.10.0.0/16 |
| WLAN_SERVICES | 172.16.200.0/24 |
| WLAN_GUEST | 172.16.100.0/24 |
on the toughswitch
Port1 = lan from ERLITE
port 4 = unifi AP
port5 = unifi AP
port 1 = trunk port vlan id 1, 100 , 200 Tagged
port 4 = untagged 1, tagged 100, 200
port 5 = untagged 1, tagged 100, 200
in the unifi controller my two SSID guest networks are tagged with the coreect VLAN.
now the problem, i get a adress from DHCP fine, but no internet, on both guest VLANs.
i tried untagging a port and put that in my computer, same thing, i get an ip adress fine, but no internet access.
what am i missing here?