Failover is too slow
Hi We have a site which is using failover with an ERL After conducting som tests we noticed that computers take up to ten minutes to connect to the second networkOr to be more exact, it works sort of,...
View ArticleEdgeMAX Edge PRO-8 VPN S2S IPsec NAT
Hi Guys So we(Branch) recently purchased some Ubiquiti equipment and now I'm trying to set up VPN S2S to a Main location (HQ) HQ LAN: 192.168.2.0/24HQ WAN: A.B.C.D Branch LAN: 192.168.69.0/24Branch...
View Articlevpn connection problems
problem: no response trying ssh to server behind firewall through vpn tunnel.error on cisco asa (the other side, 3rd party)Error…. May 10 2016 10:47:41: %ASA-4-402116: IPSEC: Received an ESP packet...
View ArticleClik here to view.
ERX-SFP Any Port-Any VLAN & per VLAN-per port filtering & SFP DDM data
Hi, I'm trying to figure out how to get a couple of things working on my ERX-SFP which is currently running 1.8.5b1. 1. Any-port-any-vlan type configuration. ie: 3 VLANs configured on the WAN side,...
View Article2 routers on 1 switch possible?
Forgive my ignorance here, I've got an edgerouter and a USG onsite. 2 ISP: ISP 1 & 2 are connected to the edgerouter, which serves the LAN in failover mode. A second IP from ISP 2 is connected to...
View Articleenabling external connections on Port 80
I am brand new to the edgemax router and need some help with port forwarding rules.I have a IIS website hosted on a computer on my private network. I am trying to make this site publicly accessiable...
View ArticleLost eth1 after upgrade to 1.8.0
I just upgraded my ERLite3 to 1.8.0, hoping it would solve a problem where IPv6 worked when I first configured it, but then would stop. But after upgrading if I go to the portal I don't see any...
View ArticleER-Lite 3 slowness and mgmt console failure (traffic analysis and netflow...
I've had this ER-Lite 3 set up at home for about a month now, and I've noticed some issues running the latest firmware, 1.8.0. The first time it happened, I was noticing some general latency so I...
View ArticleEdgeRouter offload roadmap
Hi I read in this forum that some features like QoS and also other features does not do hardware offload and that you will get very low throughput of you enable for example QoS. Does anybody know:-...
View Articleno bgp-enforce-first-as
no bgp-enforce-first-asIt is command from cisco.How to make it on ubnt edgemax?
View ArticleER-8 vs ER8-PRO
Need some buying help is there difference between the ER-8 and ERPRO-8? I realize it's the two SFP ports that can be fiber at 1GB correct? I heard there may be a boost in memory or packets per second...
View ArticleRouter Placement
I have a central office with a fiber circuit.3 airFiber dishes serving 3 different towers. Is it better to place the tower router at the office:core router --> tower router --> airfiber link...
View ArticleEdgeRouter Lite IPv6 DHCPv6 /60
Hey, Anyone noticed that the Lite router does not optain IPv6 from DHCP? My ISP assings me a /60 from DHCPv6. All devices from outside the router, gets an IPv6 but no devices behind the router gets. I...
View ArticleHow do I configure 2 WAN connections for one network?
Greetings, I have recently aquired 2 150MBps cable modems and would like to combine the bandwidth onto my network to get 300Mbps total. I have an 8 port EdgeRouter Pro running v1.8 firmware. I was...
View ArticleBest EdgeRouter for tagged vlans and performance?
I tried to figure this out on my own and I found lots of clues but I really want a definitive answer.Currently I have a classic cisco ASA 5505 with several vlans tagged on an interface to the internal...
View ArticleHigh B/W and High CPU
Hi all,Just thought I'd run this past the group. I have a ERPOE-5 with internet speeds of 100 down, 20 up. I monitor internet bandwidth using a network monitoring tool. It also lets me snmp the ERPOE-5...
View ArticleER-8 Port Forwarding dying after some days uptime
I've recently started having an issue with my ER-8 where my port forwarding is dying after a couple of days. The router is on 1.8.0 and the config hasn't changed since I installed it with the firmware...
View ArticleProblem with ER-POE and Cox cable provider.
Just recently purchased a ER POE 5 port router to replace a ER-Lite 3 port model (to get rid of some power bricks in my network rack). The ERL configuration was stable and no problems with ISP. It...
View ArticleCDN DNS Issues w/Failover Directv
Anyone have any pointers on CDN issues with directv? Reference my oringal post here about CDN issues with failover using system DNS servers that do not belong to your ISP such as level 3 etc:...
View ArticleUPNP w/Failover Config
I have load balance for failover only setup on my edgerouter but I need UPNP2 for playstation, directv and other applications. Is there a suggested method for getting it to work with dual WAN so when...
View Article