Problem with port fowards
I have installed an Edgerouter Lite by somebody, but I can't get the port forwards working. I have done it on the same way as with my own router. The only diference is that this router is using a...
View Articleedgerouter lite won't grab IP
Hello A month or so back I had a power failure that caused my ERL that had been running for 2 years to have the dreaded squashfs errors. I successfully followed this guide:...
View ArticlePort forwarding, PPPOE and Dynamic IP
Hi, I'm currently trying to expose externaly one of my servers but, I'm stuck with the configuration. I did setup my port-forwarding through the web GUI and I can access is if I'm on my lan network...
View ArticleClik here to view.
two questions about load-balancing setups
Hey gang ! I'm a close-to-total noob with QOS, and can only report one real success with load-balancing. Therefore I have two questions, regarding that working setup. - For some reason, average...
View ArticleClik here to view.
Firewall Table Error
Was editing firewall rules last night on 1.8.5 on my ERP. Received the following popup. Everything cleared after I did some CLI configs (unrelated to firewall), comitted and saved everything. Anyone...
View Articlev1.8.5 Interface Stats for virtual interfaces with offload
Hi Guys, when will "interface stats for virtual interfaces with offload" be available?The last topic i was able to find was EdgeRouter Data Graph Statistics Is there any timeplan for implementing that...
View ArticlePoor performance after upgrading to 1.8.5
I recently upgraded to 1.8.5 but after the upgrade I am not able to get more then 93 mbps on a loadbalaced setup with two 500 mbps connections.Before the upgrade I was able to max out the...
View ArticleIPv6 in 1.8.5
I know there are several topics about enabling IPv6 on the EdgeRouter X but unfortunately they seem to be outdated. I am running 1.8.5 and the CLI instructions throw some errors, I imagine this is...
View ArticleIs it possible to use Edge Router PoE 5 port as a normal PoE switch?
Hi. i'm working on a project to make at custom made PTZ Camera housing with a built in PoE (24 and 48V) switch. The camera i'm using is a ACTi B95A 48V PoE, and i know that i can use the Tough Switch...
View ArticleQuestions about the firewall feature on an ER-X, ELI5 perhaps.
Please forgive my ignorance. I am looking this article here: UBNT Maybe 1/2 way down the page, they start talking about the firewall. The text reads:The following example firewall is just very basic...
View ArticleIPv6 config after upgrading to 1.8.5
Hello! I have a small manual config that I would love to standardize with the CLI with 1.8.5, this is what I need to get IPv6 running with my ISP Ownit with 1.8.0: sysctl -w...
View ArticleSNMP wiped after 1.8.5 upgrade
Anyone else seen this? Have an ER Pro that we ugpraded to 1.8.5 yesterday morning and noticed that our monitoring system lost it. Upon further inspection, the SNMP V3 info is no longer in the device....
View ArticleEdgeRouter Lite 1.8.5 High CPU Usage
I'm noticing now that I've upgraded to 1.8.5 that CPU usage on my EdgeRouter Lite-3 is higher than it used to be... And maxes out (100%) when doing things like a speed test on my 120 Mbps connection....
View ArticleopenVPN and port 1194 firewall problem
I have created an openvpn interface on my EdgeRouter ER-X, using port 1194. I am having an issue with the firewall side of it however. I created a rule on the interface eth0/local for port 1194 that...
View ArticleSSH not working
On power on I get errors: INIT: version 2.88 booting[ ok ] Starting the hotplug events dispatcher: udevd.[ ok ] Synthesizing the initial hotplug events...done.[ ok ] Waiting for /dev to be fully...
View ArticleClik here to view.
Loadbalance / Automativ Fail over with 2 ISPs
Hi guys,I have a loadbalance setup and was wondering why my configuration is not automatically switching/ fail over when one ISP has no internet connection, but is still connected via LAN to the...
View ArticleEdgeOS not generating radvd.conf
It appears that EdgeOS is not generating radvd.conf for some reason. I enabled IPv6 thus. Eth0 is the WAN port:david@Meadows-Router# show interfaces ethernet eth0 dhcpv6-pd pd 0 { interface switch0 {...
View ArticleHelp Allowing DVR Web Interface Through Firewall
I have the ERLite3 I was able to successfully set up port forwarding for the DVR (needed to manually allow through firewall) the port forwards fine and I can access the DVR from the manufacturers...
View ArticleDNS help plz
I have a site to site VPN remote network that has some domain laptops on it, but there is no DC onsite. What I want to do is have all DNS calls go to the ISP dns but if the address requested uses the...
View ArticleClik here to view.
One user unable to access internet, but has IP. WiFi/Wired not working
Hello UBNT community I want your support with a special case.Currently I have about 70 users connected to the network I have setup, but one of users cannot access the internet. They are getting and IP...
View Article