Cable Modem WebUI Slow with Dual WAN
OK so I have a dual WAN setup where eth0 is my Cable Modem (I send most traffic over,) eth1 is my DSL Modem (I send VoIP traffic over) and eth2 is my LAN (both WANs failover to the other in case one...
View ArticleHow to filter NXDOMAIN hijacking?
Some DNS servers (Level3, TWC) return their hijacking page for NXDOMAIN. How can I filter these hijacking DNS responses and return a proper NXDOMAIN? I tried to run my own DNS or use Google DNS, but...
View ArticleDNS Updater for Digital Ocean in golang (Difficulty: hard)
Hi all, I recently joined the Ubnt community with an ERLite-3. I wanted to be able to update my DNS with dynamic-dns like capability without using a standard provider. Since I already use digital ocean...
View ArticleEdgeOS 1.8 and Vyos VRRP
Could it be that EdgeOS 1.8 and Vyos cannot share a VRRP session? I tried setting this up but they don't seem to communicate with each other, as in Vyos I see: Jun 25 15:39:09 rtr2 Keepalived_vrrp:...
View ArticleClik here to view.
Portforwarding on pppoe
Hello I have a pppoe connection and am looking to port foward traffic coming externally to my local system on port 8000. I have used the Port Forwaring tab in the GUI to try and set this up. I've...
View ArticleIPSec Certificate VPN "Road Warrior" config examples?
I currently have an OpenVPN certificate-based configuration. It works fine, but I would like to get to an (accelerated) IPsec VPN. I have seen plenty of site to site VPN examples, but no roaming...
View ArticleClik here to view.
Change LAN Port
I couldn't find my own post by searching, so I'm not even sure I asked this. I currently have my LAN set to eth1. WAN is eth0. I would like to move everything to an SFP cable (eth7) on my ER-Pro. Is...
View ArticleRe: Web Filtering rule
Is there a way to display a page when users attempt to acess a blocked page? I would like to let family know that the website they are attempted to acess is blocked as result of the web filtering...
View ArticleInternet working fine but not able to ping google DNS
I am using edge router pro and i am able to access the internet using the router but when i try to ping the google dns or any other public address it is not pinging
View ArticleDual WAN with routing based on DPI
Hi folks I'm working from a home office and have an Edge Router Lite. The ADSL internet I can get in our house is not very good, so I have got a second internet connection that runs over 4G. However...
View ArticleClik here to view.
Backblaze upload traffic not detected by DPI
I am using Backblaze for online backup. DPI detects a small amount of traffic to Backblaze, but most of it is lumped into the SSL/TLS and Web-Other category. Is it possible to update the DPI...
View ArticleClik here to view.
Switch WAN/LAN
Hi, I have the following setup: The ISP WAN cable goes to a switch where one end is used for internet and the other for IPTV (there's a separate device for the IP Tv which needs to be hooked to the...
View ArticleLocal webserver not accessible by it's external IP, locally works fine
Hello, I have a local webserver here. When I connect to it by ip address it displays fine. When connecting to it by domain name from external it displays fine. When connecting to it by domain name from...
View ArticleFlaky L2TP port forwarding flakiness
I have a brand new that I bought because I needed the ability to set up ipsec tunnels. The first step was to replace the linksys wifi router we had with the edgerouter and get it working as a drop...
View ArticleEdgerouter redundant switch uplink
We are designing a new location for one of our customers, and would like to have a pair of ES-12F switches at their core. We will create a lag between the two, and have access switches with uplinks to...
View ArticleEdgerouter, vlans, and UniFi SSIDs
Hi, I have a 5 port Edgerouter and a Unifi AP Pro. Currently, WAN is eth1 and eth2,3,4 are bridged into switch0 10.18.21.1/24. The AP is plugged into eth4 and I have my LAN's SSID set up and all's...
View Articlehow to redirect all VOIP traffic to the other WAN link on edge router lite
Hi there is there a way to run to WAN link one as failover and use the failover link only for VOIP? setup - edgerouter lite -> UAC AP PRO
View ArticleEdgeRouter Lite configuration choices
I just ventured into a more sophisticated home networking setup, stepping up from a standard consumer wireless router to a combination of EdgeRouter Lite and AP AC LR. I have the access point working...
View ArticleJoining two networks
Hi All So here's the deal. I have an exisiting network running from a Lite.This does DNS/DHCP 192.169.10.1 I'm having a second internet line put in as my current one is a bit crap during peak hours so...
View Articleedgerouter lite to aws ipsec tunnel
I'm trying to establish an IPsec vpn between my office and AWS via an edgerouter lite. I did the same steps, more or less as here:...
View Article