Connectivity issues eth2 eth1
HelloRouter:ERLiteI can´t connect from eth1toeth2.A pingfrom a hostineth2(192.168.3.0/24)toahostineth1(192.168.2.0/24)is possible.Conversely,alsoI knowhow Iboth Eth bridge, butI don´tactually.I...
View ArticleSimulating WAN or cellular connections? (i.e. adding artificial latency)
Is there an equivalent to netem on the EdgeRouter platform? https://wiki.openwrt.org/doc/howto/packet.scheduler/sch_netem Basically, it's an emulator to artificially add latency to specific...
View Article2 EdgeRouter X v1.7.0 for vpn to remote office.
A client of mine has a remote office, but he wants to be able to access the company servers, as well as use his SIP phone. I am trying to accomplish this using two EdgeRouter X v1.7.0. I have been...
View ArticleVLAN based QoS for 8x8 VoIP
Hello again everyone. Coming to the community for guidance on where to start with VLAN based QoS for VoIP. Currently running on an ER PoE5 for my network. Keeping things simple so we have the main...
View ArticleConfig Documentation?
I have an Edge Router POE with 1.8 Firmware. I have two internet connections. I would like to have out VPN and our static nat entries to come in eth 0. Any static nat data shoudl go in an out on eth 0...
View ArticlePort Forwarding with non-32 WAN Netmask
Trying to open up RDP through the ERL 1.8.5beta2, and I setup the following:Forwarding rule, including auto-firewallNAT destination ruleAnd I still can't RDP in from the outside. I read a bunch of...
View ArticleRe: IPSEC VPN Site-to-Site NOT Working using sample config
Hello; I 'm trying to VPN between ERL-1.8 and a RV042. The devices seem to be connecting, and I tried to duplicate all of the firewall rules discussed in this thread- but there is still no traffic...
View Articlebug? /config/scripts not cleared on config reset?
I am using a script in /config/scripts/post-config.d as part of my configuration. It seems that this is not wiped when using the "reset to default" on the system tab. It seems like the whole /config...
View ArticleERL 1.8 failover load balancing multiple xbox 360s guidance
I have read multiple posts, but there is conflict information being provided. Is there any guidance anyone can provide on how to configure failover load balancing with support for mulitple xbox 360s...
View ArticleEdgeRouter X SFP won't power up
I just pulled an EdgeRouter X SFP out of the box. When I plug the power supply into the wall, the green light comes on and stays solid. When I plug the barrel end into the EdgeRouter, it makes a click...
View Articlefirewall session timeout
After I applied the basic IPv6 ingress firewall rule (stateful inspection). The log indicates some packets from Google are keep getting dropped. I am not seeing any service impact. What is broken...
View ArticleClik here to view.
SmartQOS Bandwidth too high or too low
I'm guessing that many have the challenge of determinining the bandwidth of their WAN service and in many cases it's not feasible to disconnect the LAN to determine the speed or else it fluctuates...
View ArticleI'd like to block Youtube access for a certain set of devices
I'd like to block YouTube access for a certain set of devices. These all have fixed IP addresses on the inside of my NAT. What is the best way to do it and is it possible to put time slots on these...
View ArticleClik here to view.
BGP BFD from Edgerouter to Juniper SRX, session won't stay up.
Hi,Pulling my hair out trying to keep BFD up between my edgerouter lite and Juniper SRX. The Edgerouter lite works fine running BFD to a Mikrotik device I have. It seems BFD initially comes up for...
View ArticleClik here to view.
How do i add static null routes
Hello U forum members, I want to set a few null routes but i am a little confuse on how to do this.I have been using the GUI (Routing / Route / + Add Static Route) , but it does not appear to have all...
View ArticleEdgerouter pro / Unifi combination to a second lan
Hello, We recently deployed a network at a large facility using: Edgerouter pro2x Edgeswitches 16 (connected by sfp to the er-pro)13 unifi accesspoints (11 ac lite, 2 unifi outdoor) The edgerouter runs...
View ArticleEdgeRouterX-VLAN and Native Access
I am trying to manage a UNIFI-AP-LR which supports 3 SSID’s (3 separate VLANs).The AP is connected through an EdgeRouterX, with 3 VLANs on that port.All is well.Except, I cant manage the AP itself, as...
View Articlefirewall rules don't appear to be taking effect
I have applied the rule TCP 1935 to 192.168.1.202 but it is still not showing open externally nor can i access it... Testing with an external port checker (nmap) or trying to connect to the service...
View ArticleEdgeRouter Lite Newbie. How do I get this router to just work?
Hi folks! I have increased bandwidth speed that I'd like to take advantage of at my home and my current router can't keep up, so I purchased this router. However, the software is the most complicated...
View ArticleOverthrow(shutdown) session bgp
Hello looking our monitoring we fall in both peer and BGP session were restart could check if there is a problem for log:Is see: BGP[798]: BGP-3: [SOCK CB] sock_getpeer() failed (134:Transport endpoint...
View Article