migrate from ER Lite to ERP
Hey folks. I'd like to migrate/upgrade from my ER Lite to an ERP. Is it as simple as downloading the config from the ER Lite then uploading that same config to my new ERP? Obviously I'll make sure...
View ArticleEdgeRouter X added LAN can't get DHCP to work
I must be ignoring something really basic in my configuration. Here is the scenario. I have an EdgeRouter X in my home running firmware version 1.9 in a very basic vanilla configuration: eth0 -- WAN...
View ArticleER-8: Untagged Traffic on different VLANs
Hi All, I'm in a situation where I've got 3 vlans, Internal, Guest, & IoT connected to an ER-8. The Internal subnet is untagged on eth2, and the IoT subnet is untagged on eth3. The Guest vlan is...
View ArticleEdgeRouter X L2TP
Several months ago I used the following link to set up L2TP VPN remote access and it has been working flawlessly. I now have the need to change some users authentication and the pre-shared key but do...
View ArticleClik here to view.
Edge Router X keep disconnecting from USG
Hi, i have a USG and a ER-X acting as a switch connected directly to the USG everything seems to work fine except i keep seeing the below in events section of the unifi controller, can anyone suggest...
View ArticleCan't connect to work from Mac running AnyConnect 4.2
I have 200Mbit Comcast service to my house and I was thinking I'd get better performance with the EdgeRouterLite over my existing DLink-655. Swapping in the EdgeRouterLite and everything is great...
View ArticleHow to setup Port Forward in 1.9.0?
I tried the tutorial found @ https://www.youtube.com/watch?v=R9eynv1Pyvo However, he is using 1.8.5 while I am using 1.9.0. Server's firewall is offline for the purpose of the test. But I keep gettig...
View ArticleSite-To-Site VPN Route Any
Our current configuration all of our traffic from the branch location to the Co-Location (Server and Application) as well as all internet traffic. We are setting up a new Edge Router Pro for...
View ArticleEdgerouter as IPSEC client VTI
Hey guys i want to make my ERL have interface be a IPSEC client to a VPN provider like i have seen in many guides with openVPN and than selectivily route source traffic over that interface. Is that...
View ArticleRDP not working inside network
Farily new to setting up this kind of router. My experience is mostly with setting up my old netgear router. I have what I think is a pretty straightforward setup. WAN is setup on eth0 and LAN is on...
View Articlehost name not resolving across subnets
I am having trouble reaching a Synology NAS by hostname on 192.168.2.X from a laptop on 192.168.1.X. My edge router is directly connected to my WAN. It is also directly connected to my NAS and a...
View ArticlePort Forward Help
Hi Ubnt! I've persistently had this problem for a few days now. I've followed many tutorials on the web but find myself hitting blanks. No matter what I do, I can't seem to port forward. I'm a windows...
View ArticleERX slow access to WebIF through Firefox
Hello, I have difficulties to access to any ERX SFP with Firefox.With Safari the web page appears instantly...But with Firefox it takes 30 seconds to show the login page! And the page is not very...
View ArticlePersistent site-to-site VPN with automatic dual WAN fail-over
Hypothetical: I have a server setup behind an EdgeMAX router that has dual WAN fail-over configuredIt needs to maintain a persistent site-to-site VPN connection between two other EdgeMAX routers over...
View ArticleSite-To-Site VPN Communications between Sites
Hello All, I am new to Edgemax routers and I am attempting to setup a site-to-site vpn (hopefully using gui). I have created a tunnel and it indicates that it is up but seemingly no traffic is passing...
View ArticleDNS Server Domain Override
Hi,I'm trying to setup a DNS Server Domain Override.For example, all internal requests '*.mydomain.local' should go through DNS1.All other requests should go through DNS2.Is that a possibility?I was...
View ArticleER-Pro-8 Seen on both 172.16 and 192.168.0.1?
Hey guys, I have an ERPro-8 on a basic setup config. e1 is 172.16.0.0/22 DHCP 0f 0.1-254 with 120 of those leased. My client is saying that users aren't able to connect, that he has machines uable to...
View ArticleSetting dhcp-server authoritative removes all dhcp configuration
I was having trouble with periodic errors: duplicate ip's assigned in my log, as decribed in forums...here...
View ArticleRelease public IP
How do you release the public IP on an EdgeRouter X? I'm getting an EdgeRouter X SFP tomorrow that I'll be using instead. And my ISP's lease time is like 6 hours, I'd rather not wait that long.
View ArticleSharing a fork: mDNS repeater with blacklisted subnets
Hi,I recently configured a few site-to-site tunnels with the mdns repeater enabled, and discovered a rather annoying problem: Chromecasts and Apple TV's from remote locations showing up as streaming...
View Article