Our current configuration all of our traffic from the branch location to the Co-Location (Server and Application) as well as all internet traffic.
We are setting up a new Edge Router Pro for Site-To-Site Vpn's and moving away site-to-site vpn's that connect to our firewall.
We are doing this so we can also route all trafic through a filter to control traffic.
Setting up a IPSEC tunnel for the remote subnet is fine. but we want to router traffic not just from the branch subnets (Example: 172.16.1.0/24) to the CoLo Subent (Example: 192.168.222.0/24, But also route all trafic destine for the internet as well.
If I input 0.0.0.0/0 (Like we do currently for our current firewalls and all past ones.) it says input a valid address....
Am i missing something?
Just FYI the interaces are not public facing. I have a 1-to-1 NAT inplace on our firewalls and a policy to let IPSEC traffic through.
