Stuck on Squidguard blacklist DB update
I recently noticed that squidguard was no longer blocking adult sites and while troubleshooting I decided that maybe I should update the blacklist. Ran the update command but it stops at the Building...
View ArticleQoS kills my bandwidth
Hi, I want to use QoS to cap the bandwidth of my guest network to the Internet. I tried some setting a basic queue in different ways but every time it ruins my bandwidth outside of the guest network. I...
View ArticleClik here to view.
Help with Inter VLAN
Hi I'm really confused with the problem. Either I don't know what I'm doing or I'm just missing something. I have 192.168.1.0/24 as Main SubnetI tried to create a VLAN20 for NVR and Cameras with Subnet...
View ArticleEdgeRouter Lite Bad Ethernet Port
Hello, I've been running an EdgeRouter Lite since 2014. I did need to replace the flash drive about a year ago due to the original failing (fairly common the way it sounds). However, this past weekend...
View ArticleEdgeMax 1.9 CenturyLink Gigabit with routed network
EdgeRouter Lite 3-Port Running v1.9.0 The issue is that I'm not getting a /29 from the PPPoE auth, I'm getting a /32 and part of the /29, with a /32 mask. Config:firewall {all-ping...
View ArticleClik here to view.
Wizard WAN+2LAN2 - no internet on router & client
Hey, I've read a lot of threads about not being able to access the internet after using on of the setup wizards. However, none of the solutions described seemed to help me. I have an Edgerouter PoE...
View ArticleRoute for host
Hello! I wonder how to make all trafic for one host to go through specific WAN interface? I tried to add static route but it doen't work trafic goes through both WAN interfaces.
View ArticleEdge router Lite v 1.9 drops RDP connection both NAT and Outgoing
Hi! My Edge router with version 1.9 drops RDP about every 2 minutes. It drops booth nat connections to my network and RDP sessions from my network. The connection is dropped for about 1 sec and gets...
View ArticleER-X Power Supply/Daisy Chaining PoE Question
I'm currently powering two ER-Xs with a 24V 0.5A PoE injector and passthrough PoE ( PoE injector --> ER-X [Router] --> ER-X [Switch] ). I needed a switch in my garage and didn't have power...
View ArticleDynamic DNS Oddity
Hello, first time posting, and I have searched but couldn't find anything to fix my exact problem. I have two EdgeMAX router lite's setup at our CEO's two houses. We have many services like camera...
View ArticleQoS question slow down youtube
My company recently onboarded with Netsuite and I'm running into some performance issues with my Netsuite users. Basically, sales orders and some other pages take awhile to load up. Bandwidth looks...
View ArticleAccess Control List - Blacklist on an Edgemax?
Hello all - is there a way to create an list of URLs that can be blacklisted on an Edgemax Lite 3 port router? Have been using Host files on multiple PCs for this purpose - but there are other devices...
View ArticleERX unsure of how to apply VLAN and routing
Hi I've set up my ERX with eth0 as WAN (currently just acquiring DHCP from my internal network but will later be connected direct to my modem) and switch0 with all remaining ports eth1-4, ip address...
View ArticleLoad Balancing 2 WAN from the same ISP
Hello, I need some help to setup an edge router PoE.I got 2 modems.WAN1 on eth0WAN2 on eth1LAN on eth2 is it possible to loadbalance from 2 modems from TMC that uses the same gateway?Each time I'm...
View ArticleUpdating OpenSSL and OpenVPN on Edgerouter
Hi everyone. Before i do anything stupid, is it possible to update OpenVPN and OpenSSL (just those packages) on an ERLite-3 running EdgeOSv1.9.0. (Thinking about apt-get install openssl &&...
View ArticleStatic host mapping not reflected on other VLANs
I got an EdgeRouter with eth1 (10.23.15.x) and eth1.2 (10.23.16.x).Static host mapping (guestwifi.mydomain.com) works fine on eth1 (DNS 10.23.15.1), but not eth1.2 (DNS 10.23.16.1). I had to change my...
View ArticleClik here to view.
OSPF with 2 EP-R8 not learning routes
Hello all I have been learning how to setup OSPF on some EP-R8s with a default gateway. The R8s have two cables between them that connect eth1 to eth1 and eth2 to eth2. They also have a LAN 192.168.x.x...
View ArticleEdgerouters and Monitis monitoring
Just started using Monitis, and I wonder if it's possible to use the smtp monitoring for bandwith on my edgerouters? There is a monitoring agent that needs to be installed, so I'm guessing that a...
View ArticleERX IPSec disconnecting approx. every 2 minutes
Hello, I migrated from ERLite to ERX and found out that my IPSec tunnels are re-connecting approx. every two minutes. This is what I see in the charon.log, only messages about creating acquire job and...
View ArticleWhitelist IP
I have been asked to whitelist some IPs athrough our Firewall to help with some voip phone issues.How do I do this on our Edgemax pro 8? Is it possible to do via the GUI?We have a few clients on...
View Article