Hello all
I have been learning how to setup OSPF on some EP-R8s with a default gateway. The R8s have two cables between them that connect eth1 to eth1 and eth2 to eth2. They also have a LAN 192.168.x.x on eth0 that has pcs/servers. Router 1 also has the default gateway on its LAN to the internet.
I was testing the failover/load balancing on these 2 ports (eth1 & eth2) by unplugging the cables and plugging back in.
They are both now missing the 2nd routes to each other local 192.168.x.x networks and I am now sure why.
Any hints as to what has happened or suggestions how to avoid this if it is not normal?
This is what they currently look like.
Image may be NSFW.
Clik here to view.
Router 1Image may be NSFW.
Clik here to view.
Router 2
This is what it looks like when they first start up or if no links get unplugged. I feel like this is the correct routes for them to have.
Image may be NSFW.
Clik here to view.
Router 1 startupImage may be NSFW.
Clik here to view.
router 2 startup