EdgeOS 1.9.0: VPLS does not forward PADI packets for PPPoE sessions
Very simple to reproduce: Follow the guide here. Now connect a PPPoE client to eth0 of R1 and a PPPoE server/AC/NAS to eth0 on R3. PADI packets from the client at Site A are not forwarded to the...
View ArticleClik here to view.
ERlite to ERlite ipsec vpn not working when local ip = 'any' - dynamic endpoints
Hi guys, I'm trying to run an ERLite ipsec vpn tunnel to an ERlite tunnel. Both endpoints are DHCP but I use dyndns. endpoint1 = site-1.dyndns.orgendpoint2 = site-2.dyndns.org I can ONLY get the tunnel...
View ArticleLLDP reported via SNMP
I'd like to bump this. I know there was a user at one poitn that provided a patch to install lldp into snmp... but i'm not looking to side load things like that (and I'm not sure it would even work as...
View ArticleInter VLAN routing with vlan-aware enabled
Hoping someone can help me out. Have a switch switch0 on an ER-X that I each VLAN is tagged as needed and works with vlan-aware is enabled but I can't route between VLANs. I disable vlan-aware and I'm...
View ArticleVLAN tagging on EdgeRouter
Hi, I'm working on adding a few VLANs on my network to isolate things a bit (e.g. separate guest network, and a separate work network since I work from home). I tried to set up VLANs on the switch0...
View ArticleDNS via DHCP and cache
I've noticed that Edge Router Lite gets DNS servers via DHCP from my ISP. Is there a way to ignore these as I prefer to use Google's DNS. yeri@sg:~$ show dns forwarding statistics ----------------...
View ArticleUnable to forward DNS requests to other NAMESERVERS on ERL
Hello, I'm struggling with this and sor far I haven't being able to set the DNS forwarding, so any helo is really appreciated.Here's my DNS config: forwarding { cache-size 150 listen-on eth2 listen-on...
View ArticleClik here to view.
EdgeRouter X OpenVPN
Hello All, Could some one direct me or get some help on where I can find "OpenVPN Site-to-Site" setup on an EdgeRouter X (ER-X). Please VPN IPSec Site-to-Site and Remote AccessOpenVPN Site-to-Site and...
View ArticleOpenVPN one one interface, not on another
I have an EdgeRouter Lite, with my internet connection coming in on eth0. Currently I have an openvpn connection setup in the usual way, and traffic from eth1 going over this connection. I have...
View ArticleERL Lite 3 ports green on boot
This unit has been in use for some months. On boot the console, ports 1 and 2 both light up green when empty, and router is not responding to ping; seems unresponsive. Only the last port responds to a...
View ArticleEdgepoint R8 LAN to LAN routing not working.
Hello, I have a problem with a new Edgepoint R8 router that will not route between 2 LAN networks. The setup is this: PFsense Router: 10.0.1.1 (10.0.1.0/24 lives here), I've setup a static route to the...
View ArticleCan't Connect to Work VPN
I don't know if I missing something, but I can not connect to my work VPN from home. I have an Edge Router X at home. I keep getting an error whn I try to connect. However, if I use a Netgear router...
View ArticlePort forwarding on EdgeRouter Pro
Hello all, I'm not a port forwarding expert by any means, and I've found the Ubiquiti Forums to be super helpful, so hopefully someone out there can provide their expertise.I have an EdgeRouter Pro,...
View ArticleClik here to view.
Ultra Newbie with ER-X & Uverse
Hi Reading more and more through the forums, I realize I probably am as Newbie as they come here; I mean, I don't think I know anything it seems so I could really use the help... As it says in the...
View ArticleStrange behavior: device networking ok, but lost networing after start...
Hi guys,I've a strange behavior just after start generate vlan traffic from a specific NIC. I setup a test enviroment, with an ERPoe-5, a virtualization host, two virtual guest and one laptop to admin...
View ArticleVLAN dns help
hello, i have ERPO5 with multiple vlan on it and i want to one vlan ( kids ) to commited to OPENDNS only which i set it up in dns part of this vlan dhcp , it was working perfectly on 1.7 but now on 1.9...
View ArticleClik here to view.
Load balancing using backup link when it shouldn't
Hi All, I can't figure out why the WiFi backup Internet link is being used to push out trafic at a site. Here's what the overall trafic looks like: The WiFi Internet is configured to not push or...
View ArticleEdgeOS does not accept "@" in passwords
Just passing this along in case it helps someone. I was setting up a new EdgeRouter X using the basic option. Firmware updated to v1.9.0. I changed the default password, and when I saved the config, it...
View ArticlePrevent/restrict access to the router from subnet.
I have a setup of EdgeRouter X and UniFi AC LR. First of all, the router, it is manually configured, so maybe I missed something (and yes I know about wizards). I'm using eth0 for ISP, eth1, eth2,...
View ArticleVLAN - no internet access
When adding VLANs should it make use of 0.0.0.0/0 automatically?I unable to access the internet from the added VLANs.There are no firewall rules other than on eth2 to drop by default.Codes: S - State,...
View Article