Hi,
I'm working on adding a few VLANs on my network to isolate things a bit (e.g. separate guest network, and a separate work network since I work from home). I tried to set up VLANs on the switch0 interface, which seems to have worked, but when I tried to set up the eth2 interface to tag as vlan 123 (example number) with "set interfaces switch switch0 switch-port interface eth2 vlan pvid 123" I get "Error: platform does not support vlan settings in switch0".
Is there a way to do VLAN tagging on individual ports with the EdgeRouter PoE, or do I need to get a separate switch for that?
What I'd like to end up with is eth0 as WAN, eth2 and eth3 tagging VLAN 123 and eth4 being a trunk for my AP AC for a few WLANs, each WLAN on a different VLAN.