Routing by Source IP throttling issues
I have set up several networks (mid-size) that use dual WAN connections and I have noticed one thing in common...after I set up routing by source IP (policy based routing using modify firewalls and...
View ArticleUnable to use the categories to block traffic (I'm doing something wrong...)
I'm testing the feature to block some categories and starting out with Computerrelated as an example. I can see that the Ruleset's counters are passing the packets through, but I can't get why it's not...
View ArticleVLANs on PoE 5 - Followed KB articles, can't get out to the internet.
Hey everyone. Trying to get a VLAN up and running for our VoIP phones today. Haven't had much success. The end result is that I can get on the appropriate subnet, ping back to the router, etc..., but I...
View ArticleLACP/LAG question
I have two pairs of Airfiber 5x connected through an NXN. I have configured LACP on both pairs, and traffice flow correctly. I have lost the ability to manage the radios in band now though. Is there a...
View ArticleBasic SOHO Wizards Not Working. External networks unreachable.
ROUTER: EdgeMAX X with firmware v.1.8ENVIRONMENT: Cable ISP provides a single ethernet cable (WAN) to the home and an 8-port ethernet switch (LAN) to branch to all outlets in the home. Outside of the...
View ArticleOpenVPN access to gateway
I've set OpenVPN client in ERX. Let's say my main network isk 192.168.1.0 and oVPN network is 192.168.2.0There is only one rule for routing the clients at the moment (push-route 192.168.1.10/32).If...
View ArticleELR Firmware 1.8.0 update failed to upload
I've got an EdgeRouter Lite with firmware 1.7.0. Trying to upload the new 1.8.0 firmware ER-e100.v1.8.0.4853089.tar results in a "failed to upload" message. What am I doing wrong?
View ArticleEdgeRouter lite3 - How to setup DMZ subnet on eth2?
I am a bit of a noob. I have done these setups on sonicwalls but it seems edgeos it takes some know how to get it working through the CLI. Anyway, here is how I want to set it up. eth0 = WANeth1 =...
View ArticleStatic Route disappears on reboot
My WAN has a static IP address, so I set my default route as a static. This works great until the router reboots, at which point, no internet. This is a cause for some frustration, as you may imagine....
View ArticleVPN Hell...
So I'm new to EdgeOS, but here is where I am... I have a Linux box running Strongswan 5.x and it connects just fine to my Azure VPN. Here is the config: conn...
View ArticleClik here to view.
eth1 (WAN) disappeared?
This is a weird one... Last night, I configured my ERL (running EdgeOS 1.8.0) for ipv6 following this guide. I noticed tonight that it wasn't working, so as a first (lazy) troubleshooting step, I...
View ArticleER-Poe PoE-IN?
Hi all,this is my first post here! I have a little office network made with Mikrotik and, since i have to connect 3 wireless links, i would like to try to manage them with an ER-PoE. It seems to be a...
View ArticleNAT Pool entries
I've seen the following two threads which gave some insight, but I dont think they will acheive what I want....
View ArticleWorking Config - ERL Dual WAN (Failover only) With PPPoE(vlan)
Hi All, Just wanted to share my EdgeRouter Lite (v1.8.0) config in the hope that it might help someone out. Scenario:I have two WAN connections.Wan 1 is fast (1Gbps), cheap and unlimited data. Connects...
View ArticleERPoe‑5 Number of VPN Connections?
Hi, I'm surprised i can't easily find this out, but can someone tell me how many vpn connections can be setup on the ERPoe‑5? thanks
View ArticleSyslog messages and traffic analysis questions.
I am a bit new to this router and have a few questions with a new config. ERL is running EdgeOS 1.8. Q1: In the syslog I am seeing some weird stuff in the syslog and am not sure why.....
View Article1.8.0 Bug in vyatta-bridge.pl
In 1.8.0, there is a bug in /opt/vyatta/sbin/vyatta-bridge.pl line 123. A reference to $ifname should be $port in the system call. Here is the current version: sub remove_bridge_port { my ($bridge,...
View ArticleSupport RFC4638
I've opened this thread concering support for Baby Jumbo frames (PPPoE), the 10 YEAR old RFC4638 which is STILL not supported in latest 1.8.0 firmware. I've already posted in another thread on the same...
View ArticleConfig Backup attempt causes web portal to go offline.
ER-X running 1.8.0. Whenever I try to download my current config from the web portal, it spends a few seconds compressing the config, then responds with 20 secons with:Unable to connect to your router....
View ArticleLog flooded with "martian destination" warnings from VOIP device
I'm getting a constant barrage of warning messages in my log...2016-05-19 18:09:41 Kernel.Warning 192.168.0.1 May 20 01:09:41 ubnt-franklin0 kernel: IPv4: martian destination 0.21.68.160 from...
View Article