Hi All,
Just wanted to share my EdgeRouter Lite (v1.8.0) config in the hope that it might help someone out.
Scenario:
I have two WAN connections.
Wan 1 is fast (1Gbps), cheap and unlimited data. Connects directly to the ISP's ONT via PPPoE with VLAN 10
Wan 2 is fully managed with SLA's 100Mbit. Our DMZ resides on a /28 on this connection.
I wanted to put our internal network on the fast, unlimited WAN 1 while still giving a direct route from LAN to DMZ (WAN2)
I started with the "Load Balancing" Wizard and chose the Failover-only option for Wan 2 and used that as the base.
I'm forwarding VPN traffic to the LAN gateway and allowing both SSH and EdgeMax Management from my (static) IP at home. SSH public key is installed and password authentication is disabled.
Everything appears to be working very well with this config and tested the failover on both connections
I'm very impressed with this little router =)