ERLite-3 performance/setup
Sorry if his has been asked many times before, but struggling to find a definitive answer. I understand that WAN+2LAN is 1x port for Modem/WAN and 2x LAN ports become bridged to operate on the same...
View ArticleRegister Phones from Specific external IPs to Internal VOIP Servr
So for security reasons I do not want to just pinhole port 5060 and related ports thru my firewall for all the world to see.. So I am trying to create a firewall rule to allow 5060 traffic (and others)...
View ArticleDesign Ideas and Technology
I'm toying with a new concept for connecting some of my towers up to individual outgoing connections. Let me set the stage of a scenario. 3 towers, each connected to 2 adjacent towers with Airfiber X5...
View Articlecan't get download speeds more than 200Mbps on WAN or 400Mbps on LAN out of...
Hi All, I have seen similar topic discussed before in this forum but for some reason i could not figure out what the maximum bw of the edgemax router pro poe 5. Can someone please confirm if the values...
View ArticleERL Hairpin configuration for HTTPS
Hi all, I've been reading through articles in the knowledgebase such as "EdgeMAX - NAT Hairpin (Nat Inside-to-Inside / Loopback / Reflection)" and things Ive found with Google but I can't find anything...
View ArticleER-X Not routing between subnets on VLANs at all
I have an ER-X running 1.9.0 stable. I'm migrating an existing flat network to a routed network. I have several VLANs defined. The ER is not routing between any of them. This should be working out of...
View ArticleEdgeSwitch Smartqueue Setting guidelines
Hi, I've had great results with the fq_codel, aka SmartQueue implementation for some time now. But i've only seen sporadic recommendations for the various settings. I tweaked mine a bit and think I...
View Articleplease help convert mikrotik fw rules to edge firewall rules
without touching zone firewall (i have tried it and it takes 5mins for ERX to boot up): /ip firewall filter add action=drop chain=input comment="drop invalid" connection-state=invalid add chain=input...
View Articleedge router x config
5 hours researching/messing for this noob...My desire is to have two WLAN's and one LAN for home/home office use.I'm trying to configure the router using a cable from my pc to eth0 - no other...
View ArticleNetFlow using nfacctd
Has anybody successfully set up a NetFlow collector using nfacctd? I've set up flow-accounting from my router, sent to the collector location on port 2055. Running tcpdump shows that data is getting to...
View ArticleClik here to view.
Edgemax Dashboard Broken
After getting tired of AT&T's default router, I decided to invest in a ubiquiti setup. After spending a couple hours setting it up and exploring, I got it setup like I wanted. After reseting my...
View ArticleDHCPv6 how-to for idiots?
My provider has finally upgraded to IPv6, yay! My edgerouter running 1.9.0 happily gets an IPv6 address now. However, I can't for the life of me figure out how to enable DHCPv6. Most of the guides I've...
View ArticleNo LAN access for VPN
Hi, I've just installed a new EdgeRouter and managed to get most of it working as I wanted. Unfortunately I've hit a brick wall with VPN and local network access. The LAN is using 10.1.1.0/24The VPN is...
View ArticleClik here to view.
Getting wrong ip dhcp
Hello.I have edgemax router lite.Setup wan + 2lan2192.168.1.1and on my computer i get 192.168.30.** on all my computers.Anyone knows what i im doing wrong?
View ArticleHelp : Policy based routing for PPTP
Just got a ERLite3. Trying to set it up for personal use. Used the wizard and setup Wan+2Lan2. eth0: WANeth1: Lan1 : 192.168.5.0/24eth2: Lan2 : 192.168.99.0/24 I have a StrongVPN account and would...
View Articlea question about configure prompt
you know how it is when youre in configure mode, it would look like htis: user@hostname# command[edit] why not just make it: user@hostname [edit]# command its really messy to have 2 lines for every...
View ArticleER-Pro L2TP - VPN Clients Can't Ping Network After 1.8.0 to 1.9.0 Upgrade
Hello, I have an ER-Pro with dual-wan failover and an L2TP / IPsec VPN. Remote clients connect to the VPN (desktops, smart phones, etc.) to use network resources. After upgrading from 1.8.0 to 1.9.0,...
View ArticleClik here to view.
Triple WAN with Fail-Over & PBR => load balance breaks PBR
Hi Community & UBNT-Staff,After several attempts to setup my desired -quite simple- configuration (no firewall in place except the below) my PBR rules always stop working after adding the...
View Articledhcp option 252 wpad.dat not working
I been trying to get dhcp option 252 working for several hours now and nothing I do seems to work. I first tried setting wpad-url in the config tree. Then after some googling I tried removing that...
View ArticleEP-R8. Accident.
Soft ver. 1.9.0Connected yesterday. Uptime about 24hNo transmission.From time to time a Ping EP-R8Did not work ssh and www. What could happen? uff. log on sshreboot now it works !
View Article