QoS for Google Hangouts.
We have an office with more than enough bandwith but are still having issues with Google Hangout audio and video quality. I simply want to give high priority to Google Hangout traffic. We have multiple...
View ArticleER-X and multiple webserver setup
I have an ER-X at home but just ordered one for my office. They have a peculiar setup and I'm hoping the ER-X can help. They have:static IP --> ER-X --> switch --> other computers/APs...
View ArticleNew setup using Edgemax how to route throught the router
Fist off i'm green at the router part I've got a couple new towers setup and they are mine to manage so off i go (we mostly use MikroTik routers but wanted to try Ubiquiti)(ip address are not actual...
View ArticleEdgerouter POE link-down then reboot causes link to stay down if not auto
I have been able to reproduce this issue since my first Edgerouter (v1.2.0)and I have deployed a lot of these units. When I set the speed and duplex on an Ethernet port to 100/full, lose link on that...
View ArticleKiwi CatTools to backup config? Or script?
Howdy, I'm trying to determine if there is a method to have Kiwi CatTools connect and back-up config, or possibly an alternate mechanism to easy back-up the config file?
View ArticleERL WAN Failover
So I'm trying to setup failover only on an ERL. I setup the router using the Loadbalancing wizard and setup Eth0 as wan1 and Eth1 as wan2. I've read a lot on the failover but I'm a huge newbe on all...
View ArticleLoad-Balance with Zone-Policy
Hello I bought a Edgerouter X one week ago, EdgeOS is amazing plataform. But I´m having problem to configurate load-balance with zone-policy together. I got make a config to work load-balance with 2...
View ArticleFiberPoE Help
Hello, I've just purchased a FiberPoE and SFP module and I have started doing some testing on the bench, but I'm having some issues getting the unit working how I envisaged. Essentially I want to use...
View Articleinternal traffic to published web servers gets redirected to ER's webgui
Hello,Been setting up my first EdgeRouter recently, most of the stuff works the way we anticipated, although there’s a small glitch (as usual). Got here few servers published using NAT, all works fine...
View ArticleVPN On Second Router
Hello, I just got an edgerouter x and connected my "old" netgear nighthawk rourter in a lan-lan connection to the edgerouter x. I was using the VPN service on my nighthawk router and would like to...
View ArticleTunnel on dynamic WAN IP route all traffic through tunnel
I have a site (Site B) with dynamic WAN IP-address and another site (Site A) with several public IP-addresses. Can I somehow setup the EdgeRouter to connect to Site A over Internet and the dynamic...
View ArticleGetting DHCP Server to Work?
Hello, I have purchased an ER-X to use as an OpenVPN server (site-to-site).Although I am aware that the OpenVPN configuration doesn't feature on the GUI at the moment (I am on EdgeOS 1.8.5), I thought...
View ArticleClik here to view.
New to the EdgeRouter family, putting the ER-X through it's paces
Hello there, I recently acquired an ER-X and I am stress testing it at home, and I still beleive this thing is awesome for the price. Web filtering with squidguard while transferring on a 50mbps link...
View Articlehelp ERLite 3 - can't upgrade from 1.8 to 1.8.5 and 1.9 beta
Hi Everybody, I have an upload failed when trying to upgrade from 1.8 to 1.8.5same thing from 1.8 to 1.9 beta 2 I also try to do it via CLI and local ftp, no way....I try the same after a factory...
View ArticleEdgeRouter Pro RAM
I'm sure there should be a thread somewhere on this, but I can't find it... Is there a list somewhere of memory for the EdgeRouter Pro and which sticks are proven to work / not work?
View ArticleSteps after the first step
I have just received my first ER-X. I have successfully upgraded the firmware to 1.8.5 and setup a test network (a subnet off my home LAN) using WAN+2LAN2 wizard with eth1-4 all on one LAN. Wow, that...
View ArticleClik here to view.
QOS question again
HiI do not quite understand whyI put simple QOS to 65 mbps that I want but only get 35 mbps outI put it then to 90 mbps and get 55 mbps down at my computerI have about 75 mbps if I do not turn to QOSI...
View ArticleEdgeRouter POE - Users all inactive
I'm using an EdgeRouter POE and installed the 2Lan2 wizard options. The system is currentlly runing with a UniFi ap-ac-pro with each radio setup with 1 SSID. No VLANs. Nothing unusual about the...
View Article8 port/5 port Toughswitches and Foscam Cameras do not mix anymore for me
So for the past 2 years or so I have had a nice setup with a Synology NAS and the Foscam cameras. Running the network has been Ubiquiti ToughSwitches both are POE. I have 2 cameras (Foscam FI8910W) on...
View ArticleER-Lite, VPN and browsing the local network.
Hello. Having recently setup and started to learn about the Edgerouter lite (which I have been very happy with), I am now trying to get a l2tp vpn working. I have gotten to the point where I can...
View Article