I can't get my EdgeRouter setup properly
I want to leave my cable moded/router as is and add a subnet via the EdgeRouter X on port 1. Later I may add another EdgeRouterX for another Subnet. I will leave my some devices connected directly to...
View Articlerouting based on switch port - is that possible?
Hi all,I run an EdgeRouter X with a pretty simple configuration:WAN side:eth0 - ISP1eth4 - ISP2 LAN side:switch0 (eth1,eth2,eth3), 192.168.1.0/24, dhcp on switch0 I need to create a routing policy...
View ArticleLoad Balancing Issues
Hi, I'm using an ERL on 1.8.5. Just reset to factory today. Ran through the Load Balancing wizard and configured all my other custom settings. Now, when both eth0 and eth1 are connected, the router is...
View ArticleRADIUS/Groups redirects
I am working with a network, the equipment on there authentications through FreeRADIUS in order to connect to our network, in the RADIUS setup we have several groups but one is set as a "Disconnected"...
View ArticleEdge Router X - VPN L2TP. only able to ping, no other ports work
I have followed the below guide, and I can connect to my network remotely. I'm only able to ping devices on my internal network, and external network. I'm unable to resolve DNS queries and no...
View ArticleQuestion: How can I improve this ER-5 setup?
Here's what I have: ER-5 (PoE) 1.8.5 Console - No deviceEth0 - To cable modem (Arris TM822)Eth1 - External gigabit 8-port Netgear switch (GS-108) [see below for connected devices]Eth2 - Mac (that I am...
View ArticleDebian Repo down?
Guys, Just upgraded to 1.8.5 from 1.7. Hitting this error when trying to do an apt-get update: W: Failed to fetch http://security.debian.org/dists/wheezy/updates/Release Unable to find expected entry...
View ArticleAdjusting interface restrictions on DNS server?
When configuring the built-in (dnsmasq) DNS server, one has to specify which interfaces are allowed to access this. This is typically good so you don't open the DNS server up to the internet. However,...
View ArticleClik here to view.
Offloading causing RDP issues
Hello, So the tl:dr is that RDP connections to a termial server were constantly disconnecting/reconnecting and I believe it happened due to offloading. From what I can tell as soon as I run;set system...
View ArticleDo you need Static IPs for Dual-WAN Failover? / Can't get failover working
Do you need to have static IP addresses for Dual-WAN Failover? Or just for Dual-WAN Load Balancing? I have two WAN connections from two different ISPs and I want to set up one as a backup (failover)...
View ArticleERL Open VPN Site-to-Site
I followed these directions with my own variables: https://help.ubnt.com/hc/en-us/articles/204949694-EdgeMAX-OpenVPN-Site-to-Site I see a little traffic on vtun0 but I can't see across the vpn, i.e. I...
View ArticleAccess internet or Azure VM using T2TP VPN client
We are having issues with our L2TP VPN Remote Access. Our setup:ER-PRO (v1.8.0) with:eth0 – WAN 1 (PPPoE, static IP) – ISP 1eth1 – WAN 2 (static IP) – ISP 2eth2 – LAN privateeth2.20 – VLAN GUEST...
View Articlecommit-confirm ....without reboot
I think I know how it should work: configureset interfaces ethernet eth1 speed 100set interfaces ethernet eth1 duplex fullcommit-confirm 5===========commit saveexit However, at ========= , I'm cut...
View ArticleOpenVPN responding from wrong UDP port
I'm trying to get my ERL to serve as an OpenVPN server. I'm pretty sure I have the configuration correct, but tcpdump is showing responder packets being sourced from the wrong UDP port. Edit: Apologies...
View ArticleIPSec site-to-site with L2TP
So we had an MT to ER site-to-site IPSec tunnel working great. Client (the ER side) wanted to do VPN's again and we wouldn't let them use PPTP. Got L2TP setup and working great, which in turn broke the...
View ArticleRelease WAN IP ?
Hi, Is there a command I can issue to release the WAN IP (FiOS) using the ER-8 router ? I'm trying to avoid having to call Verizon. Thanks.
View ArticleHelp Confirming I selected the right equipment
Hello Everyone!I've read a bunch of articles here and appreciate everyone sharing their experiences. Much help for so many. Me: I know Junos OS fairly well - Juniper SRX 210, 220, 240 series....
View ArticleScheduled Backuup
Hello Guys, Does anyone have able to configure this on their network where a scheduled backup for edge routers can be configured? Any suggestion or possibly previous post would really be appreciated....
View ArticleIf PBR routing table has many default routes
Is it possibe to have several default interface routes in one PBR table provided that only one of this interfaces can be connected at a time: table 110 { interface-route 0.0.0.0/0...
View ArticleSimple way to point traffic to specific WAN port with VLANs and OpenVPN?
Couple things I'm trying to do. I will be factory resetting my ERL to start with a clean slate. I want to:Have all secure network traffic (LAN VLAN 10/WLAN VLAN 15) go to ISP 2 DHCP on eth1Have all...
View Article