ER8 1:1 NAT
I'm replacing a cisco with config equivalent to: Interface GigabitEthernet0ip address 192.168.1.193 255.255.255.240ip nat outside!ip nat source static 192.168.2.100 192.168.1.202ip nat inside source...
View ArticleRandom reboots are killing me - ERL + 1.8
As a followup to the thread here where I was experiencing random reboots that I thought might be caused by some combination of VRRP, VLANS, and offload - I'm seeing it on other ERL hardware with only...
View ArticleEdgerouter X Bandwidth Cap
Hi, I've got an ER-X configured to have 3 networks on it. We do video streaming jobs with it, so long term I want to use the ER-X to do QoS on our outgoing connection. However before we get that far,...
View ArticleWill sslh transparent proxy config break offloading?
I run sslh on my ERL-3, so that I can have incoming HTTPS, SSH and OpenVPN traffic all incoming on tcp port 443. I'd like to implement 'transparent proxy support' as mentioned in the docs for sslh...
View ArticleERX-SFP DHCP client option 121
What's the secret sauce for getting the ERX-SFP to properly honor option 121? It's requesting it, and I'm sending it, but the routing table doesn't seem to want to install the routes. This is on...
View ArticleClik here to view.
Connect to services in local network by external IP
I have a edgemax router. Router has IP 192.168.123.253I connected my ISP to ETH1, my switch is connected by router to ETH0.My pc has IP 192.168.123.100My server has IP 192.168.123.200I forwarded port...
View ArticleVPN with ddns.net IP
Trying to set up a VPN on an ER-Lite with one end static and the ER-Lite end using DDNS.net. The comands I have been using don't work with the ddns.net as I think it is looking for an actual IP instead...
View ArticleClik here to view.
zone based firewalling with site to site vpn
Here there are two sites. R1 is the 'core' site and R2 is a 'branch office'. R1 has lots of firewall rules implemented as zone policy rules. The problem is that all traffic from the VPN looks the same...
View ArticleFirewall rule not working as expected.
Hi!. I am basically using the straight SOHO setup. One port as WAN, one port as LAN. I've added a NAT rule and got SSH traffic to work for my server at home. I attempted to make an access list to...
View ArticleClik here to view.
dhcpd logging level / preventing dhcpd from generating log entries & workarounds
Is there a way to either adjust the verbosity of dhcpd, or to prevent it from making entries in the log? I have an ER-X that has been in service for about 2 months and the log is 2 megabytes, 99% of...
View ArticlePolicy Routing
Any help/direction on configuring source-based routing in this scenario:We only have one internet connection, but have configured a site-to-site VPN to route traffic from every device on the second...
View ArticleDual ISPs Configurations
Hey guys I own a ERPro-8. Right now I have Comcast ISP buessniess setup. I am Ordering AT&T fiber line. Is there any documentation on how I could bond the two or use them as a redunancy incase one...
View Articlepublic lan ip to show in place of wan ip
Hello, I've got this edgerouter lite that has a lan of 222.245.90.57 255.255.255.248 and wan 111.158.21.26 255.255.255.252 I want to get it set up so that 222.245.90.58 shows as the wan ip if I google...
View ArticleVLAN - Help the Newb! Win Prizes! (Not really)
I promise you guys, I've been researching and trying to figure out how to accomplish what I'm asking now. The problem is that I have, what are probably simple questions, that I don't have anyone to...
View ArticleEdgerouter local DNS query
Okay, first, I know there are threads that LOOK like this issue, but not from what I can find. The issue is, I can't get the router itself, via ssh, to figure out the IP address associated with a DNS...
View ArticleDDNS + Load balancing
I have eth0 and eth1 as load balancing WAN with failover only on eth1, but I want to know current IP for backup WAN eth1 (GSM connection). I have configured DDNS for eth1 but it goes through eth0 and...
View ArticleBGP Dual ISPs dual routers problem
Hi, I have a pair of edge router pro configured with bgp to 2 different ISPs. I believe that the initial configuration we had was working good, but recently one of the ISPs had a failure in the...
View Articleedge router reboot issue
We have a couple of edgerouter pro using software Version: v1.7.0 Build ID: 4783374. Las time we rebooted the router it came into a state with limited commands and we had to issue the boot command. Is...
View ArticleClik here to view.
Edgepoint R6 bridge
I've never actually used EdgeOS and I'm thinking of getting the Edgepoint R6 for a small site, I'm sure the ports can bridged so I can route with a Mikrotik? No offense to UBNTs routing
View ArticleBandwidth sharing question
I would like to control/share WAN bandwidth with devices on my LAN such that each device gets a guaranteed % (totalling 100%), but when one or more devices aren't fully utilizing their portion, the...
View Article