Completely new to Ubiquiti and by no means versed at routers/switches/firewalls.
I wanted to use the ERPOE-5 to create 3 VLANs (separate networks) and connect a UniFi but as I work with it, I am not sure it is possible.
I want one network that only has hard port and two that would have hard ports and wifi. I thought I could generate a VLANs on ports 1, 2, 3 on the ERPOE-5, use unmanaged switches where necessary and then connect the UniFi to 4. Then use the UniFi controller to tie together the networks.
The trouble I am having is: I removed port 3 from the switch configuration (I was assuming I had to do this), then I created a VLAN on that port, and I added a DNS server entry for the VLAN subnet. But when I try to connect a PC to the port, it will not connect.
Let me know if I am using the ERPOE-5 in a way that it was not intended. Also, let me know what I would need to create the networks I list.