Help with multi subnet routing
Hi, I have an edgerouter LITE, with:Eth0 as WAN x.x.x.xEth1 as LAN 192.168.0.1/24Eth2 as LAN 192.168.1.2/24 It only has firewall rules for eth0/in and eth0/local. Eth1 goes to a switch where all my...
View ArticleEdgeRouter X powered by POE
I am trying to power an Edgerouter X from a Linksys SRW224P switch. I have connected to ETH0 from the switch. The port shows active and power being supplied but the router will not power up.Any...
View ArticleEdgeMax freezes
Hello, The EdgeMax that's been used for our unifi wireless access points network has been jammed/frozen 2 times today. The only led that's still lit is the one from the power, all the rest is out. Is...
View ArticleClik here to view.
LAN to Lab subnet
Hello everyone, I'm trying to setup a home lab using a pretty uncommon network installation and I'm not able to make it work. I'm here:LAN <= LABI need:LAN <=> LAB Here is the setup:The lab...
View ArticleMultiple WAN Network on ER-8 and UniFi AP's
Not sure whether to post this here or on a unifi board. We are setting up multiple UniFi AC LR AP's with 3 wireless networks in our building. We are using an Edgemax ER-8 Router. We want to know how we...
View ArticleDPI - classification questions
Does Ubiquiti manage the DPI signatures in-house? Is there any detail on how they work, or a process for suggesting things to include? UniFi "traffic"I have UniFi WAPs talking to an external hosted...
View ArticlePossibly bricked remote ERX
I have two ERX at two different houses. They have been up and running with no issues (until I decided to mess with them). I wanted to set up an IPSec tunnel between the two for easier access to my...
View ArticleHow to block websites??
Can someone please tell me how to block certain websites for good and how to block websites for certain times of the day? for example block www.facebook.com from 7pm-11pm and block www.youtube.com...
View ArticleIPSEC Phase2 PFS group1 not available
Just spend some time troubleshooting site to site VPN to Cisco IOS router.I figured option "enable" would give me dh-group1 , but phase2 didn't came up admin@ERL# set vpn ipsec esp-group TS01 pfs ?...
View Articlewriting config file
I have been reading this post... https://community.ubnt.com/t5/EdgeMAX/Edgerouter-Lite-Getting-rid-of-Bell-Canada-s-Homehub2000/m-p/1526491#M105280 I would like to grab the configuration and apply it...
View ArticleFactory Default ER-POE5
Hi all,I'm going to be reconfiguring my ER-POE5 to remove the software bridge across the ports (and adding a switch). I'm leaning to factory default and starting over instead of editing the current...
View ArticleClik here to view.
Access WiFi router on separate subnet
I am trying to gain access to a Wifi Router located on a seperate subnet on my network but I am having difficulty figuring this out. Any assistance is appreciated. Thanks! Here is a crude diagram of...
View ArticleER-POE5 Automatic POE?
If I set one of my ports to 48v POE, does this just mean that it is capable of providing this current for a device that needs it and it will automatically detect the need or is this just full on? If I...
View ArticleER-X crashed/rebooted, started up like when you do a firmware upgrade, not...
This morning my ER-X SFP was not working. It wouldn't give out addresses via DHCP and even if you set a static IP it would take 10ms to respond to ping (usually 0.2ms). After rebooting the log showed...
View ArticleNo DNS after zone-policy
I'm trying to create a zone based firewall on my ERLite-3 but everytime I turn it on I am unable to resolve DNS requests. I've attached my conf file detailing my firewall and zone-policy. Can anyone...
View ArticleIPv6 DNS Server
After much trial and error and having to change my MAC address to get around Comcast giving me a /64 and /60 lease, I finally have IPv6 working using prefix delegation on my ER-Lite! I have the ER-Lite...
View ArticleERL-3 No GUI No Ping
After a restart ERL-3 v1.80 no longer responded to pings on any port. After resetting ERL-3 to factory defaults the console serial port shows this on restart. What is going wrong?...
View ArticleOpenVPN ERLITE client to ERLITE server
After some time I've setup an OpenVPN server on one erlite and have connected another erlite to it as an OpenVPN client. Problem is I can ping the client lan from the server side but not the server...
View ArticlePriority QOS Per Port (edgerouter-x)
Hi all, I find myself being overwealmed by all the info in terms of QOS here. I have a setup as such:Port 1: LAN 1 (192.168.1.0/24)Port 2: LAN 2 (192.168.2.0/24)Port 3: LAN 3 (192.168.3.0/24)Port 4:...
View ArticleNeed help picking a product
I need to replace a cisco 2900 router that is being used right now just to route between the internet and our MPLS traffic. It is the default gateway at our HQ and it can't keep up with the load any...
View Article