OpenVPN Server + Client
Hello,I have read lot of time all subject here but I have no clues on how to make thisin real life.I have 2 Edgerouter:One EdgeRouter Pro in datacenter with BGP and IPv4/IPv6 PI routed on itOne...
View ArticleER-X v1.8.5 & hwnat
Sorry for the newbie question, but as an owner of a ER-X that just received hwnat functionality in the 1.8.5 release, seeing as that functionality is off by default, I was wondering if there is any...
View ArticleQuestions regarding wizard and initial setup
I would like to have a setup as follows. eth0 waneth1 wan-wifieth2 wan-wifieth3 laneth4 lan "potential dmz?" Now the eth0 I wold like on its own. IE no failover or no load balancing. eth1 and eth2 I...
View ArticleEdgeRouter X DHCP assign IP by port?
I'm currently using the EdgeRouter X in the WAN+2LAN2 configuration and would like to have a fixed IP address issued by the DHCP server based on the port. For example, eth1 would get 192.168.1.2, eth2...
View ArticleCorrect way to PVID on EPR6?
I have an R6 in production that is setup with all ports in switch0. I've just updated to 1.8.5. I want to set eth0 to pvid=11, but leave all other ports alone. When I enable 'VLAN Aware' it makes all...
View ArticleUSB tethering to iPhone as WAN?
Anyway we could use an iPhone tethered via USB to an ERP as WAN? Android would be usable as well. We just have unexpected outages, and it would be nice to be able to roll on site and set up a system...
View ArticleSelective VPN Routing for Media Streamers
Hi there, I am looking to set up a selective based VPN routing on my EdgeRouter Lite. I am relatively new to this product and I am hoping to get some help from you folks if possible. I have a VPN...
View ArticleHow to remove a web filter from the CLI
I´ve tried to apply a web filter in my EdgeRouter Pro with the following commands in the CLI: ubnt@er-lite:~$ configureubnt@er-lite# set service webproxy domain-block youtube.comubnt@er-lite# set...
View ArticleHW Offloading on ER-X Firmware v1.8.5
Hi, Just wondered if someone could let me know how I would go about enabling the HW offloading functions in the ER-X that was added with firmware v1.8.5 Many Thanks Jay
View ArticleProper firewall and port forwarding setup for non-route-able IP
I have a non-standard setup, where my router is hidden from the internet by our ISP-middle-man. They have an A-class publicly visible IP address and they fraction the use to a number of households; the...
View ArticleHow do I configure one device with a second static IP?
I have TWC internet that comes with five static IP addresses. Currently I have my EdgeRouter 8 configured with eth0 as my WAN with eth1 and eth2 as a bridged LAN. I would like a device (security...
View Article3rd WAN interface for specific VLAN interface (GUI?)
Hi all! I’m (fairly) new to ubiquity product but nonetheless very enthusiastic about the products. I started out with a few Unifi products for some clients to a current configuration with a EgeRouter...
View Articlefirewall ipv6-address-group
Greetings, This firewall address group works: ipv6-address-group cfengine_server { description "CFEngine master server" ipv6-address 2001:470:1d:a2f::2 } But this firewall rules fails: rule 100...
View ArticleRIP Filtering via prefix list
Trying to filter (Block) ALL outbound RIP prefixes out of a patticular interface via a distribution list. Will this wotk?Essentially this router will only learn from this interface and will not...
View ArticleSpeedtest_CLI.py - How to install ?
How do I install speedtest_cli.py on my EdgeRouter ?https://github.com/sivel/speedtest-cli
View ArticleMultiple WAN interfaces on ERL
Hi all, I am interested in configuring an ERL to use two interfaces for WAN (with dynamic addresses) for load balancing purposes. I would want to configure rules (perhaps using NAT) for directing all...
View ArticleBlock WAN IP
Hello Community I've read a lot about firewall rules but it is still not working. I'd like to block the ip ranges 155.133.82.1-155.133.82.254 (and to test it 213.162.68.0-213.162.68.254) But i can...
View ArticleUSG to EdgeRouter Site to Site VPN
I'm trying to set up a site to site VPN between a network with a USG and a network with an EdgeRouter POE. I found the following article, but it looks like it is out of...
View ArticleERL 1.8.x breaks IPv6
Worked fine on 1.7.0, but 1.8.0 and 1.8.5 break my IPv6. Config attached. Thanks!
View ArticleLoad-balancing and tunnel: route confusion due to tunnel mark inheritance
I'm running EdgeOS 1.8.5 on an EdgeRouter, and I'm using load-balancing (eth0, eth1, and eth2) and an IPIP tunnel connected to eth0's IP address. When packets come in via the tunnel, they get...
View Article