EdgerouterLite Equipment Selection
I am rebuilding my wireless network and wonder can I put a switch or cascading switches 'underneath the umbrella' of a EdgeRouterLite (ERL) to provide vlans for operating separate networks using Unifi...
View ArticleTraffic Shaping on Two ISPs with Differing Upload/Download Speeds
I'm trying to create a traffic policy that will work with two different ISPs (coming in on eth0 and eth1) that we are using. One is a 50/8 connection and the other a 12/2. Essentially I have two...
View ArticleShorten config.boot?
Is it possible to shorten the code with, for example, semi-colons? Or is there a syntax description? from: rule 1 { action accept state { established enable related enable } } rule 2 { action drop...
View ArticleNaming the Router?
Hello,I'm not exactly sure what to call this, I'm trying to setup my router in a way where it will display the name whenever I run a traceroute outbound. Here's an example: Tracing route to google.com...
View ArticleL2TP/IPSec remote access
Using an ER-X as a VPN server for remote access. I've got L2TP/IPSec setup and working but I'm trying to figure out how to change the encryption/hash defaults. I see how to to do it for site-to-site...
View ArticleEdgeMAX Uptime Monitor
I wrote a bash script that can be used to monitor uptime. It attempts to ping various hosts and logs when they go down and come back up. You can also use it to send an email when this happens as well....
View ArticleOpenVPN client setup on ER-X for tigerVPN
Hi, I'm trying to setup OpenVPN vtun2 on my ER-X for access to tigerVPN but commit fails and the log shows: May 3 23:41:54 dtd-vpn openvpn[2886]: TCP/UDP: Socket bind failed on local address [undef]:...
View ArticleClik here to view.
EdgeMAX NGR with Cavium 24 core Octeon TX
Here it is announced: Cavium Octeon TXI know Ubiquity, you waited for that one, tooYou´re right: Let´s forget about 10Gbe only routing, because with this highend low cost 500$ ASIC, we will have...
View ArticleWAN failover and ACLs
Hi Guys, I want to add a WAN failover function to my customer's ERL3 routers for some particulair VLANs. There is one ISP connected to each of two ERLs and the routers are connected via eth1 with...
View ArticleClik here to view.
Multi Site Lan routing
2 Sites to be connected by private fiber link with ER-8Pros(still in planning phase), will be adding another site at some point.I want to keep vlans segregated but routed between sites, voip stays on...
View ArticleNeed help setting up ERL through Comcast gateway in bridge mode
Ok, fought with this last night for 3 hours & no go. Seems like the simplest thing anyone would ever want to do with one of these things. We have static IP range from comcast of...
View ArticleLoadbalancing bandwith based
Hello everyone, I'm trying to setup a loadbalancing bandwith based between 2 WANs.I have an Edge Router Lite with this configuration :eth0 : directly connected to a 4G modem (WAN 1)eth1 : connected to...
View ArticleGRE-Bridge over existing IPsec tunnel
Dear all, please can somone point me in the right direction I already have a working ipSec VPN between two sites using FQDN's with firmware 1.7 on ER3 Lite's Router 1 ETH0 WANETH1 10.0.0.0/24ETH2...
View ArticleClik here to view.
IPv6 Dies on Reboot - Tearing My Hair Out!?
New to EdgeOS, loving it over the past week I've been playing around. I got IPv6 to work on TWC residential cable modem service using these very simple instructions:...
View ArticleTerminal monitor for EdgeOS?
Is there a equivalent for Cisco's "terminal monitor" where you can see ethernet up/down, ospf adjacencies, etc. It's really usefull when debugging. My two cents Erik
View ArticleSimple home network - configure with just the GUI/wizards?
I'm trying to decide if I should get the EdgeRouter Lite. I just want to run it as a bullet-proof router that doesn't need rebooting every week like the usual consumer gear. I don't need to mess with...
View ArticleEdgerouter pro & edgeswitch block intervlan
Hi, I've got the following setup on the router ETH0 10.10.1.1/24 -> Managment network ETH0.2 10.10.9.1/24 -> Corporate networkETH0.3 10.10.5.1/24 -> Guest netoworkETH1 -> WAN Interfaces...
View ArticleDHCP lease time not correct v1.8.0
Hi all, wanted to run this past everyone in case I'm missing something. I have an ERPOE-5 running v1.8.0. I have the DHCP server on with a lease time of 43600 seconds. By my calculation that is 12...
View ArticleBackup file size
I am a little loss about the differnce in file sizes between the ER -X / SFP and the older Edgerouters. When I do a backup file for the X line its only KB's in size ,but when I do a backup of an ER its...
View ArticleEdgerouter X port forwarding and management
I'm trying to set up Server 2012 R2 Remote Web Access on my Edgerouter X via GUI and I can't seem to figure it out. I'm using the Wan +2Lan2 configuration from the wizard. Eth0 is plugged into my...
View Article