Edgerouter lite fails to boot...
I have an ERL that is failing to boot. Here is the boot output from the console:U-Boot 1.1.1 (UBNT Build ID: 4493936-g009d77b) (Build time: Sep 20 2012 - 15:48:51) BIST check passed. UBNT_E100 r1:2,...
View ArticleSlow vpn connection
Hello everybody [UPDATED] Followed This guide to setup vpn. And VPN thoughput is like 6-10Mbit. CPU usuage 100% when running speedtest Iam on a 100/100 connection. Dynamic ips on client and router....
View ArticleMulti-wan always having access to next hop network
I'm experimenting with a multi-wan configuration for a boat where they have a variety of uplink options and a LAN with a few VLANs. On the WAN side, they typically will have upstream routers for a...
View ArticleAlternate DNS Servers for static lease client
So im not sure how to do this, but here is what i want, and what i tried. I hope I make sense: Assign a static lease to one machineAssign an alternate DNS server to that machineHere is what i tried:in...
View ArticleSoftEther VPN for Edgerouter
Hi, despite a message post in 2014, I haven't been able to see anywhere on the forum anything related to native support for SoftEther VPN into EdgeMax. Given it's better performance compared to OpenVpn...
View ArticleFTTH Slow Download / Fast Upload
I have been trying to troubleshoot my FTTH connection. The connection is 500 Mbit synchronous from my local ISP. It is a straight IP over ethernet connection. They authenticate accounts based on...
View ArticleER-Lite help, using as a VPN edge device
So I am trying to install an ER-Lite on my network as a VPN device only.It will have its own public IP, and only be used as a VPN gateway into my current network. I already have another router(UTM)...
View ArticleEdgemax QoS
Hello. I need to set up bandwidth limiting between 5 ports on an ER-8. I need some very basic explanation of the QoS using GUI.Is there some information on this? I've read the section in the manual but...
View ArticleSomething about my EdgeRouter configuration is causing input errors on cisco...
Something in configuration of my ERPro-8 is causing oversized packet and input errors count on Cisco SG220 to go up very rapidly. Swapped a different router in place of ERPro-8 with same VLANs and DHCP...
View ArticleDisable HTTP redirect on port 80?
How can I make the GUI serve via HTTPS only, not listening on HTTP/no redirect from HTTP to HTTPS?
View ArticleBond 2 wireless links with different capacities
I'd like to link two commercial buildings together with an AF24HD pair and a AF5x pair. I currently get 300Mbps over the AF5x. Assuming I can get 1gbps with the AF24HD, I could theoretically download...
View ArticleEasy-RSA and OpenVPN
Hi there, Older versions of OpenVPN, which were included with earlier versions of the Edgerouter firmware (1.2 for sure) included a set of scripts known as easy-rsa. The Easy-RSA scripts are used to...
View ArticleRestricted rules
Is it possible with EdgeMAX ER-X to disable all incoming ports, and only allow TCP 80 & TCP 443 for outbound. The user on the LAN side cannot ping, ssh, ftp to anywhere, only can browse the...
View Articleissues with PPTP on Andriod only devices with 1.7 EdgeRouter Lite
Hello - I do not have access to the logs or configuration (at least not tonight) - but have an isssue where only Android devices (OS 5.1, OS 6.x) using native PPTP VPN are unable to connect. Tested on...
View ArticleClik here to view.
Firewall hardening
Anyone have some suggestions on what I could/should do to harden my router firewall settings? I currently have the following:
View ArticleER-8 and TS-5 + TS-8
Upgrading my normal modem/router adsl line with few APs with a barely average networking knowledge. I just got a new 100mb fibre line.Just ordered an ER-8, a TS-8 and few TS-5 to support 4 floors with...
View ArticleSlow Speed
I have a 1 Gig Internet connection. EdgePro just reaches 300 Mbit on eth1.br0 (eth6 & eth7) is for give me "redundancy" from my 2 ISP failover switches (one active and the other one is passive).Any...
View ArticlePPTP for Android
What needs to be configured to allow android devcies to connect via PPTP? Does GRE have to be added to the router? Any other configurations such as MSCHAP etc.?
View ArticleL2TP passthrough
Hello,We have a VPN server on Windows 2008 R2. The passthrough for the PPTP is working well. But I can't make the L2TP passthrough working. I have forwarded the 3 ports (500, 1701 and 4500) to the...
View Articlesupport channel :(
Every time I use ubiquiti support I'm thoroughly dissapointed. I'm going to run through my most recent support ticket to highlight this. If this were my first experience with ubiquiti I'd throw the...
View Article