VLAN101 on WAN
Hi I'm a noob trying to help my noob friend to get rid of the cwap box provided by his ISP. He has TDC FTTH that goes to a mediaconverter and then to this HomeBox as they call it. The same setup as...
View ArticleRandom Timeouts
We provide internet to several locations in town. We currently have a 10G internet connection with a /23 that comes into a Cisco 6505. We carve that up into /28 and /29 subnets and vlan them out to our...
View ArticleERPro IPSEC site-to-site VPN, can't see untagged devices remotely
I have two ERPros with IPSEC site-to-site vpn. On the remote site, I have a ES-24 port switch after the ERPro. For some reason, I can only ping devices that are tagged on the remote switch. If a port...
View ArticleClik here to view.
Conntrack: when >3000 things get slow...but plenty of bandwidth
So, this all started when I came across the problem of google docs not loading, while other pages would load just fine. Then it evolved into some pages not loading (timing out almost) while others...
View ArticleAdd WAN on eth2
Current config is:eth0 - WANeth1 - LAN1eth2 - Disabled I would like to add a 2nd WAN on eth2. If I run the wizard, I will lose my current settings. How can I turn eth2 in to a WAN connection manually,...
View ArticleHelp with an EdgeRouter Pro
I'm tryign to setup an EdgeRouter Pro that is connected to an existing firewall. Here is my current setup that is fairly basic for testing. Firewall Interface: 10.1.0.1 ERProeth0 (LAN)...
View ArticleEdgeSwitch DHCP Relay to EdgeRouter
I have an EdgeSwitch 16-XG setup to route between several VLANs.ip helper is enabled on the EdgeSwitchip helper is configured on each VLAN with the EdgeRouter set as the server. The default route is to...
View ArticleCan someone check my config please?
I am having trouble getting a LAN subnet to bind with a specific WAN static IP. eth0= XX.XXX.XXX.165/24 Cable Modem STATIC IP #1eth1= XX.XXX.XXX.XX/23 VDSL DHCP IPeth0+eth1= bond group 'G'...
View ArticleSelective VLan Bridging/Forwarding
I'm wanting to set up a VLAN that can be reached from the LAN (untagged), but cannot generate traffic to it. As if the clients inside the VLAN were in the WAN and the LAN was behind a NAT. This would...
View ArticleDynamic DNS settings
I've notived today that my dynamic DNS settings have the password in cleartext instead of encrypted passwords. Can this be changed? dns {dynamic {interface eth0 {service dyndns {host-name...
View ArticleOpenVPN client on edgerouter for management purpose
Hi, As portforwarding sometimes fails at client locations we are not always able to manage the edgerouter from remote. I have set up an ubuntu box at the office running openvpn. I installed the client...
View ArticleEdgerouter POE 5
This unit has been working for 11.5 months perfectlly and is a great performer as combined with the UniFi AC Pro that I have coupled to it. However , this morning it just stopped. My wife was watching...
View ArticleManaging EP-R6 configured as a switc carrying VLAN
I have EP-R6 (ver 1.9) configured as a switch. The switch passes several VLAN from a 5 port Tough Switch. I know how to tag and untag ports in a particular VLAN. The EP-R6 is connnected to a trunk...
View ArticleEdgeRouter X - High latency to ERX when under load
I currently have an EdgeRouter X connected to a VDSL service (80/20) via an HG612 (Openreach) modem. I have enabled QoS to try and keep latency under control while downloading, but we still seem to be...
View ArticleBandwidth of Site-to-Site VPN
I have a symmetric 100Mb/s fiber connection at 2 of my sites. I am using the EdgeMax-Lite to link the 2 sites. I am not able to get much more about 10Mb/s consistently using the bandwidth tool on the...
View ArticlePort forwarding from inside and outside network
Hey all, Sorry if this post is a little confusing, the terminaology is still fairly new to me. I recently got an edge router x and have configured the port forwarding so I can get into a server I...
View ArticleEdgerouter blocking L2TP authentication?
hey guys, it looks like i've got a pretty weird problem,i have a VPN server set up behind Edgerouter, and using L2TP.i then have forwarded 500, 1701 and 4500 port to that IP. However, whenever i try to...
View ArticleEdgeRouter Lite not working after sitting on shelf for 6 months
So i used the ERL for a long while and then switched to a PFsense box to run some tests with that. after 6 months of using the PFsense box I decided that the ERL should be more than capable for my...
View ArticleClouDNS Dynamic DNS
I am trying to setup a Dynamic DNS on ClouDNS, where I get my DNS servers hosted. For Dynamic entries they have a choice of the following to choose from as an IP update: URLwgetPERLPythonPHP Which one...
View ArticleIPSec VPN doesnt route properly
I have been trying to get an IPSec VPN to work between an ER-L and an Adtran 3448. I have a dual wan setup with 2 load balancing groups. One that points subnet 172.168.0.0/24 to WAN 1 with WAN 2 as a...
View Article