Port Forward Issue
I am trying to port forward 3389 RDP to a device on a VLAN (Eth7.5) the IP of the device is 172.16.10.5. I cannot get it to work. Any help would be greatly appreciated.
View Articleubnt-discover interface disable not working
EdgeOS 1.9 - I noticed UBNT discovery traffic on my upstream interface. Oct 9 14:42:01 ext-gw0 kernel: [eth0_local-default-D]IN=eth0 OUT= MAC= src=121.99.21.54 DST=255.255.255.255 LEN=168 TOS=0x00...
View Article[ERL] Strange ipv6 behaviour
Hi everyone, after trying for a good month I'm finally giving up and turn to the community. I have a really stange problem with my EdgeRouter lite running EdgeOS 1.9.0. But first let me describe the...
View Article[ER-X] random internet dropouts - 1 ER-x + 1 Unifi ACAP-pro
Hi For the last month I've been seeing internet dropouts...no specific intervals or similar what I'm seeing is that the WAN ip never disappears from the router and I can ping the WAN ip almost every...
View Articlednsmasq and CNAME
Hi to all I'm trying to add a CNAME record using dnsmasq. But it does not work. I have a EdgeRouter X-SFP running with v1.9.0. I ran the following line in order to add the CNAME record:set service dns...
View ArticleWAN load balance for one WAN wireless ISP the other DSL
Hi I have both a 3down/1up wireless isp connection and a 12/1 DSL connection. The wireless ISP is very reliable all the time but there is a 100gb monthly cap and the DSL is mostly used for streaming....
View ArticleClik here to view.
Crash course on ERL3 VLAN to dual WAN? 2 ISPs/2 VLANs want to direct to...
Here is a basic overview of my networkERL3 single LAN dual WANProcurve 48 port GigE switchProcurve 24 port PoE switchUniFi AC wireless AP ERL is linked to 48 port with GigE ethernet, Procurves are...
View ArticleDHCP Lease table not updating after enabling dns-masq
I followed a guide linked below to enable dns-masq, but for some reason my DHCP table shows no leases. New devices connected definitely get an IP address. I am not sure what I did wrong but have...
View ArticleResolv.conf - domain-search
Im trying to add a domain-search but i get following "error":System configuration error. Both 'domain-name' and 'domain-search' are specified, but only one of these mutually exclusive parameters is...
View ArticleBasic Queue
Good day. I would like to ask. How to use Basic queue is there any documentation about it. Im configuring it. but its always Failed to apply Configuration. just a basic config. I just want to limit...
View Articleupgrade fails from GUI and CLI
I rebooted it, reset it to default turned it on turned it off it won't upgrade. Thanks admin@edgemax-rtr:/config$ add system image...
View ArticleEdgeRouter X SFP - SFP port is unusable
We just wasted several hours trying to deploy an EdgeRouter X SFP using the SFP port. The problem is pretty easy to reproduce. Using a FiberPoE and and EdgeRouter X SFP, connect the two devices using...
View ArticleVlan for Guest Wifi
I am a Novice trying to setup a seperate VLAN for GuestWifi on our network. Here is my setup:1x Verizon FIOS router, 1 x Edgemax router, 1 x Netgear Switch, 3 x POE Tough Switches, 9 x UNIFI AP with...
View ArticleNAT bypassing Firewall rules
I noticed that NAT rules seem to bypass any firewall (in) rules. I wanted to restrict access to a forwarding to a certain IP set, but even a drop all for the specific port doesn't seem to do anything....
View ArticleEdge Router Lite on PPPoE 1Gb
Hi,I'm not yet a user of an Edge Router but I want to purchase one soon, but before that I have a few questions:1. Can I have 1Gb/sec troughtpout (WAN > LAN) using hardware offload with the router...
View Articleedgerouter X(FW v1.9) Unifi Controller(v5.2.9) and VLAN
I am having trouble with VLAN setup between my edgerouter X(FW v1.9) Unifi Controller(v5.2.9) and UAP AC LiteEdge router settingshave my edge router was set up as load balancing with failover selected...
View ArticleClik here to view.
GUI problem
Hi!I run Edgerouter X SFPv1.9.0 and I use Chrome browser. I encounter a graphic problem in the discover window. The scrollbar to the right is so tiny when I open a post. Can anyone confirm this? I...
View ArticleClik here to view.
eth1/LAN1 problem after upgrade to 1.9.0 - working but LAN1 not available
I just upgraded my ERL to 1.9.0 from 1.8.0 this morning and ran into a few problems. My firewall rules didn't transfer, and then the router refused to respond when I added them back so I had to...
View ArticleAdvanced Queue Web GUI not showing leaves
Hi I am on an ERP v1.9.0 This is the result of show traffic-control advanced-queue : branch {queue 100 {bandwidth 20mbitdescription Uploadparent 1}queue 200 {bandwidth 20mbitdescription Downloadparent...
View ArticleCarrier Grade Nat
Hello all, I'm looking to see if there is any ability to do deterministic port mapping aka Carrier Grade NAT in the Edgerouter platform. I have Edgerouters Deployed throughout my network, and I love...
View Article