Hi to all
I'm trying to add a CNAME record using dnsmasq. But it does not work. I have a EdgeRouter X-SFP running with v1.9.0.
I ran the following line in order to add the CNAME record:
- set service dns forwarding options cname=test,router.hika1
I cannot see why it doesn't work. I can ping "router.hika1" but not "test". Any hints?
Please see my whole config below:
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
speed auto
}
ethernet eth1 {
description Local
duplex auto
speed auto
}
ethernet eth2 {
description Local
duplex auto
speed auto
}
ethernet eth3 {
description Local
duplex auto
speed auto
}
ethernet eth4 {
description Local
duplex auto
speed auto
}
ethernet eth5 {
duplex auto
speed auto
}
loopback lo {
}
switch switch0 {
description Local
mtu 1500
switch-port {
interface eth1 {
vlan {
pvid 10
vid 20
vid 30
}
}
interface eth2 {
vlan {
pvid 10
vid 20
vid 30
}
}
interface eth3 {
vlan {
pvid 10
vid 20
vid 30
}
}
interface eth4 {
vlan {
pvid 10
vid 20
vid 30
}
}
vlan-aware enable
}
vif 10 {
address 192.168.182.1/26
mtu 1500
}
vif 20 {
address 192.168.182.65/26
mtu 1500
}
vif 30 {
address 192.168.182.129/26
mtu 1500
}
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name lan0 {
authoritative enable
subnet 192.168.182.0/26 {
default-router 192.168.182.1
dns-server 192.168.182.1
lease 86400
start 192.168.182.30 {
stop 192.168.182.62
}
static-mapping cisco-01 {
ip-address 192.168.182.5
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping cp1525n {
ip-address 192.168.182.7
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping gs105e {
ip-address 192.168.182.8
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping nas {
ip-address 192.168.182.4
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping qlproxy {
ip-address 192.168.182.2
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping qlproxyP {
ip-address 192.168.182.15
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping radio {
ip-address 192.168.182.6
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping router {
ip-address 192.168.182.1
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping uap {
ip-address 192.168.182.3
mac-address xx:xx:xx:xx:xx:xx
}
static-mapping vbox {
ip-address 192.168.182.9
mac-address xx:xx:xx:xx:xx:xx
}
}
}
shared-network-name lan1 {
authoritative enable
subnet 192.168.182.64/26 {
default-router 192.168.182.65
dns-server 192.168.182.65
lease 86400
start 192.168.182.66 {
stop 192.168.182.99
}
}
}
shared-network-name lan2 {
authoritative enable
subnet 192.168.182.128/26 {
default-router 192.168.182.129
dns-server 192.168.182.129
lease 86400
start 192.168.182.130 {
stop 192.168.182.149
}
}
}
use-dnsmasq enable
}
dns {
forwarding {
cache-size 400
listen-on switch0.10
listen-on switch0.20
listen-on switch0.30
options cname=test,router.hika1
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
description "masquerade for WAN"
outbound-interface eth0
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
}
system {
domain-name hika1
host-name ubnt
login {
user admin {
authentication {
encrypted-password xyz
plaintext-password ""
}
level admin
}
}
name-server 127.0.0.1
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
offload {
hwnat enable
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone Europe/Berlin
}
/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "config-management@1:conntrack@1:cron@1:dhcp-relay@1:dhcp-server@4:firewall@5:ipsec@5:nat@3:qos@1:quagga@2:system@4:ubnt-pptp@1:ubnt-util@1:vrrp@1:webgui@1:webproxy@1:zone-policy@1" === */
/* Release version: v1.9.0.4901118.160804.1131 */Thanks a lot!
Best regards,
chgruem