I am having trouble with VLAN setup between my edgerouter X(FW v1.9) Unifi Controller(v5.2.9) and UAP AC Lite
Edge router settings
have my edge router was set up as load balancing with failover selected VIA wizard then added the 2 additional DHCP servers and 2 VLANs
have DHCP/ VLAN set as follows
native VLAN 192.168.20.1/24
192.168.30.1/24 - VLAN 30 = name(F)
192.168.40.1/24 - VLAN 40 = name(G)
for VLAN 30
subnet - 192.168.30.0/24
router - 192.168.30.1
DNS 1 - 8.8.8.8
DNS 2 - 8.8.4.4
same with VLAN 40 only changing the subnet to 40
ALL pointed to switch 0
Unifi Controller settings as follows
have 3 wireless networks
M - native VLAN - WPA Personal
F - VLAN 30 - WPA Personal
G - VLAN 40 - WPA Personal
issue is M with native VLAN connects to the internet fine, F and G with VLAN 30 and 40 show as connected to the internet but keep getting "connection was reset"
apparently there is a setting i do not have correct ,
would appreciate if you can assist