EdgePoint POE current stats
I have a couple EP-R6's and curious if they have the ability to provide information as to the amout of power a POE port is delivering or what capacity remains for a system overall. I believe I saw...
View ArticleTraffic Analysis shows IP's not Hostnames
Hello! I followed the guide below over the weekend having just installed my ERLite: https://loganmarchione.com/2016/08/edgerouter-lite-dnsmasq-setup/ DNSMasque is working which is great but the last...
View ArticleEdgeRouter Lite change
How do I change the default gateway of eth0 interface in failover mode? Gateways:eth0 - 192.168.33.7eth1 - 10.12.33.1 LAN:192.168.1.1 Gateways (FailOver).
View ArticleERPoe-5 (v1.9) W/ Time Warner Cable Frequent 1-2 Minute Outages
Hello, We have setup ERPoe-5 (v1.9) on a Time Warner Cable 300/20 connection. The TWC modem is in "Bridge Mode" ERPoe-5 sees the public IP on WAN interface. Through the day, 4-5 times we see 1-2 Minute...
View Article"Disable UBNT discovery" not working
Hi, ive been playing with an ER-X running v1.9, and it seems that setting "Disabled" to UBNT discovery has no effect.I can still discover the device in the subnet even trough reboots. the config file...
View Articledeny access between eth1 and eth2
Hi I am trying to deny traffic between guest (eth1) and internal network(eth2) need something easy for time being if it's possible please.Used a simple wizard to setup the router first.currently...
View ArticleRouting to dual WAN connections with 2 VLANs on LAN with an EdgeRouter Lite
I'm wondering what best practice is for confguring an EdgeRouter Lite to have 2 VLANs on the LAN interface, each routed to a separate WAN interface. Up until now, I've separated the voice and the lan...
View ArticleBUG?: /etc/resolv.conf nameserver order problem
I have specified in the configuration:# show system name-server name-server 127.0.0.1 name-server 75.75.75.75 name-server 75.75.76.76Intending resolving via the loca dns server (which is dnsmasq in my...
View ArticleOpenVPN L2 Bridge over GRE one client only
Im quite new to Edgemax and trying to figure out how to make the Steamlink find my PC located on the other side of the tunnel. The caveat is that Stamlink only looks for the PC on its own subnet. I...
View Articleedgerouter X DPI support
I'm trying to figure out if my ERX supports DPI firewall rules or not. I've running the 1.9.0 firmware and all the settings for DPI seem to be present and when I enable DP! I see traffic is being...
View ArticleUbiquiti and Scanners/Honeypots
As a relatively new user of an EdgeMax Router (Lite), I respect its power as a router but I have also come across a possible concern and wonder how I may harden my router's presence on the internet (or...
View ArticleClik here to view.
QoS Smart Queue - Two different download rates on two ER-X's
I have a question about changing my current config to enable QoS Smart Queue with two different speeds. My current set-up:Everything works fine. Clients connected to UAP_One get full 300/20 WAN...
View ArticleNeed help winning the UBNT vs PFSense vs Sonicwall debate
Hello again! So I have been in a sort of debate with some buddies about what solution is best. I understand they all have their strengths and weaknesses, but I personally root for UBNT. We currently...
View ArticleAircontroll software
Dear Team, please help to check i install Aircontroll it not work for Rocket AC but for Rocket M5 i can add to the system. or you have other software work for Rocket M5 and Rocket AC please recommand...
View ArticleNeed Router for +- 100IP
Hello, I'm a french customer. I installed a network for the small entreprise for which I work (Modem-Router => Switch managable => 15 Wifi AP). The modem-router of the provider isn't able to...
View ArticleBricked ER-X
I recently purchased a ER-X device and it worked great for a week or so. After making some changes I rebooted the device and it never fully rebooted according to the GUI and the SSH. I could ssh to...
View ArticleEdgerouter Lite config file for 1 Wan, 1 Lan and 1 VLAN for Guest Wifi
hey guys, i was wondering if there is a config file made that has 1 wan configured as dhcp, lan configured as 192.168.1.0/24 and a vlan as 192.168.30.0/24 or whatever and configured with firewall rules...
View ArticleOSPF packets lost after reaching FULL state
My problem is that OSPF over GRE over IPSec does not work properly. The GRE tunnel seems to be fine (ping works in both directions) and MTU should not be a problem, as the missing OSPF hellos are only...
View ArticleClik here to view.
Two ER-8s - Equal Cost Failover with Each Other
Hello guys, I have a scenario that I haven't quite gotten to work yet. I need to do equal-cost failover with 2 links between edgerouters, in both directions:ER-8 Failover Lab...
View ArticleFiberPoE Link but no data
Testing these FiberPoE out. Currently running setup as follows: Mikrotik ethernet port - UBNT PoE Brick lan port, PoE port to FiberPoE poe port. Then the FiberPoE is connected via fiber to the exact...
View Article