Clik here to view.
Edgemax lite one to one NAT
I'm sure that all of this has been covered many times before. However, I'm stuck trying to get this to work. I have 5 static IPs that I need to map one-to-one with internal IPs. I'm very new to this...
View ArticleBest practice, and assistance with VPN behind client network going to network...
I'm stuck between a rock and a hard place. I have 15 sites with EdgeRouter Lite 3s, each site is identical configuration with eth0 plugged into a clients network recieving an internal 10.50.xxx.xxx...
View ArticleHigh Load Average - ksoftirq?
Hello, use an ER-Pro8 router and today I noticed that this router has undergone apparently linked to processing problems.As can be seen in the information below, we have some BGP sessions this router,...
View ArticlePrevent local DNS going to external DNS
I have just setup our EdgeRouter Lite to use the DNS Content Filtering service from "DNSfilter.com". The service is working correctly. After just one day of using the service, I checked the...
View ArticleEdgeRouter X Tag and Untag Ports Layer 2 Traffic
Can anyone explain to me the ability for the ERX to tag and untag traffic? I have two separate networks that I want to keep logically separate, but the sources of the traffic are untagged. I want to...
View ArticleL2TP VPN - Please help
I recently deleted my PPTP VPN server and setup an L2TP VPN server instead. I am able to connect to the VPN server without problems and can access the router via GUI and SSH however I am not able to...
View ArticleObiTalk VOIP
How do I configure the EdgeRouter X to work with ObiTalk VOIP? ObiTalk support states to just put it on the DMZ. My old D-Link router had a simle option where you could give it a LAN IP for DMZ. I...
View ArticleEdgeRouter Lite dead after UniFi Controller Update
So I have a EdgeRouter Lite(2.5 years old) connected to a Meraki 8 port POE switch(Free) and then I have 2 AUP-AC-Pro(just recently upgrade my old UAP-AC). Everything was working great until I noticed...
View ArticleClik here to view.
Block mailserver SMTP OUT on WAN2 but allow SMTP IN on WAN2
Hey guys, I need to do a config I have not done before, I did some searching around here but my scenario seems a tiny bit more complicated, so wanted to check here before I mess up the clients live...
View ArticleERL3 create PPTP Client
I cant seem to find in the WEBGUI on how to set this up? I cant find it either in the Config Tree? i have an ERL3, how do i create a PPTP-Client connection to a remote client site who only has a VPN...
View ArticleERL3 Schedule Reboot every Saturday
Hi since there is no webgui on this, is there a way to set a reboot schedule once a week?(ie: Saturday 2:00am)?
View ArticleOpenVPN Site-to-Site Can't ping LAN
Hi, I'm using OpenVPN on two ERLite routers for a site to site connection. I can ping the remote router IP from either end, but can't ping the LAN devices. This pinging is directly from the routers...
View ArticleLoad balancing 3 WAN PPPoE & VLANs on ERX
Hello folks, I'm fairly new to Ubiquiti (having previously worked with MikroTik), and I'm trying to replace a god-awful Draytek 300B that currently acts as a load balancer on my network with an...
View ArticleEdgerouter PoE 5 firmware 1.9 and Firefox
Hi I bought an Edgerouter PoE 5, had trouble enabling PoE with Firefox. Said "carrier detected"... Full rants in...
View ArticlePCQ equivalent?
Is there something similar in an Edgerouter to PCQ in a MikroTik? Specifically, the ability to have a queue tree that can dynamically create individual shapers based on entries in a list? What I would...
View ArticleCan't enstablish TCP connections over IPv4 on a dual stack DSL
Hi all! I have upgraded my home network with a ER X and a UAP AC LR. After a week of studying manuals, wiki, reading forums threads and RFCs I have manged to configure everything the way I wanted but...
View Articlepppoe-log - Growing "Protocol-reject" entries after move to new Telekom platform
Hi, today I was moved to the new platform (BNG preparation) of the german provider Telekom. Since the switchover, I'm periodically getting these kind of entries in the ppp_pppoe0.log: root@router:~#...
View ArticleSecond WAN connection and default route
We have an Edgerouter Pro and everything is working the way we want it to. I've been asked to run a second internet connection into the router and create a new LAN subnet, and any devices on that...
View ArticleClik here to view.
Some Clients do not recognize their Static IP
Hi Folks, I'm using my EdgeRouter Pro as Router and DHCP Server for some VLANs.Everything works fine except that some clients always have a new IP also when I made them Static.This happens on all VLANs...
View ArticleAdvice on setup of ER-LITE 3 for UK VDSL with pppoe OpenReach modem
I am setting up a ER-LITE 3 for my parents who live the other side of the country - I'm going to send them the pre-configured router and have them just swap out their existing router (an ageing Draytek...
View Article