I have been trying to troubleshoot my FTTH connection. The connection is 500 Mbit synchronous from my local ISP. It is a straight IP over ethernet connection. They authenticate accounts based on MAC address. So there is not PPPoE or VLAN to configure. They connection is up and running, but I get about 100-180 Mbit down and 480 Mbit up. I combed through the forum to find previous posts regarding fiber connections and tried a few things. Hardware offloading for IPV4 forwarding is enabled.
Here is my config:
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
speed auto
}
ethernet eth1 {
address 192.168.1.1/24
description Local
duplex auto
speed auto
}
ethernet eth2 {
address 192.168.2.1/24
description "Local 2"
duplex auto
speed auto
}
loopback lo {
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN1 {
authoritative disable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.38 {
stop 192.168.1.243
}
}
}
shared-network-name LAN2 {
authoritative disable
subnet 192.168.2.0/24 {
default-router 192.168.2.1
dns-server 192.168.2.1
lease 86400
start 192.168.2.38 {
stop 192.168.2.243
}
}
}
}
dns {
forwarding {
cache-size 150
listen-on eth1
listen-on eth2
}
}
gui {
https-port 443
}
nat {
rule 5010 {
outbound-interface eth0
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
}
system {
host-name vickfam-rtr
login {
user admin {
authentication {
encrypted-password
plaintext-password ""
}
level admin
}
}
name-server 8.8.8.8
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone America/Chicago
}
/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "config-management@1:conntrack@1:cron@1:dhcp-relay@1:dhcp-server@4:firewall@5:ipsec@4:nat@3:qos@1:quagga@2:system@4:ubnt-pptp@1:ubnt-util@1:vrrp@1:webgui@1:webproxy@1:zone-policy@1" === */
/* Release version: v1.6.0.4716006.141031.1731 */