Hi Guys,
Ive got a bit of a challenge here!
I've got an external IP range and have different LANs. 80.xxx.xxx.25 goes to eth1 which is main network, 80.xxx.xxx.30 goes to eth3 which is my web server network. Both are completely separate and on different ranges internally too and there is no internal route between them. When browsing to my website externally works perfectly fine and resolves to the .30 address but when on the main network .25 it also resolve to the .30 address but the webpage always goes to the EdgeRouter login page. What is the best way to fix this? I'm sure it's just a rule or a route because it is getting to the EdgeRouter still seems like just needs to get to the next hop :/
I have DNAT rules saying for example port 80 going to 80.xxx.xxx.30 goes to 172.xxx.xxx.30 (webserver) and SNAT going 172.xxx.xxx.0/24 - all protocols - translate to 80.xxx.xxx.30
I also have the same on the main network too.
I've got a /29 external IP range and the same thing happens on all of them
I tried enabling hairping NAT through the GUI which didn't make any difference not sure if I set it up right but seemed quite basic.
Currently running 1.8.5 on ER-X SFP
Thanks in advance 
Josh