Dual WAN, dynamic IP. 'web check' only work on primary interface
EdgeOS 1.9.0 on ERL. I have dynamic IP updating enabled on my dual-WAN setup. The first IP is fine and updates correctly however due to my topology I cannot get the second to update correctly. The...
View ArticleGRE and/or VPN IPsec is only handling HTTP/HTTPS
I've just begun setting up my device for the first time and have established successful VPN IPsec and GRE tunnels separately to my destination, however, only HTTP/HTTPS traffic is traversing either...
View ArticleERPOE-5 with two RocketM5 and Unifi APs, same subnet
Hello, I finally had some time to take a deep dive on the ERPOE-5 and have been able to simplify my network a bit. But I'm having some trouble integrating a second AP covering the same subnet. eth0:...
View ArticleDNS host names wizard
Will the DNS host names wizard (firmware v1.9.0) setup local DNS? Are there other settings I need to configure?
View ArticlePort Configurations
Newbie here. Couple questions I couldn't find answers to in my hours of Google Fu. 1. Can the Console port be mapped to be an eth3 port?2. Is it possible to habe eth2 and eth1 on the same subnet...
View ArticleClik here to view.
Edge Router Cannot Download at Max Bandwidth
Hi everyone, I am quite new to the EdgeMax range so please bear with me. I have setup my Edgerouter X and it is functional, however max download speeds cannot be achieved, even when no one is on the...
View ArticleEdgerouter lite using PPPOE will not use WAN IP for Proxy
Hello all. I have been using a Edgerouter lite for two years now to host a proxy which listens on the WAN interface with service from a cable ISP. I am now trying to use the proxy with a PPPOE...
View ArticleFirmware Upgrade
I would like to ask. I have a edge router poe.. with configuration using wizard only. currently at 1.7.0.. dual wan..and 1 network.. why does everytime i try to upgrade my firmware to 1.80 or 1.9.0 im...
View ArticlePort forward to FTP
Hello, I have an ASUS router which provides my FTP. The router used to be connected to the WAN but I have now reconfigured it to connect to the Edgerouter as an access point. It is working well. The...
View ArticleDynamic IP configuration: Only one (the last) 'options' config line it allowed.
Within the EdgeOS configuration for dynamic DNS it is possible to add config directly to a ddclient config file outside of the params directly supported by declaring "options <options to go in...
View ArticleClik here to view.
Enable communication between the two LAN on the same ERLITE 3
Dear All,I have two LANs connected on the ERLITE3 router:eth0 192.168.1.1/24eth2 192.168;2.1/24 I would like to enable the computers of each lan to communicate with each other For instance currently i...
View ArticleClik here to view.
Routing outside an OpenVPN tunnel... Help needed :)
Sorry, newbie to Ubiquiti gear but I love it already... Setup: ER-X, Firmware v1.9.0Internet Gateway: 192.168.1.1Client A: 192.168.178.20Client B: 192.168.178.30 Ok, what's the problem? With this...
View ArticleEdgeRouter-X stacking
is it possible to stack (daisy chain) edgerouter-x switches? I have 2 spare edgerouter-x and was wondering if I can make a 8 port switch by stacking them?
View Articlex sfp 1.9.0: ip route flush every 10-12s
Hi, the other day I configured my edgerouter x sfp firmware 1.9.0 to send logs to a remote server. I then saw that the router was issuing this command every 11s: root : TTY=unknown ; PWD=/ ; USER=root...
View ArticleClik here to view.
How to configure static IP for the same MAC address for 2 (or more) DHCP...
It might sound like a silly idea but it's actually not. I have a few different dubnets and some devices (that require a fixed IP address) are moving between those subnets. But EdgeOS will not let me...
View Articleread-only user with more access
I've recently setup Rancid for config versioning and would like it to use a limited/read-only account. It appears the Operator level cannot view the configuration. Specifically:cli-shell-api...
View ArticleEdgeMAX - ER3 lite. Dual wan, filter traffic on lan ip, not vlan
Hi forum Is it possible to force traffic from ip lan_01 to use wan_01? And lan_02, lan_03 etc to use wan_02? Im considering making rules based on ips or h/w adresses. 10.0.0.10 -> wan 01, 10.0.0.11...
View Articlemodify dscp : possible completions
Playing around with QoS settings, hitting tab and ? key:admin@fw01# set firewall modify SETDSCP rule 1 modify dscp Possible completions:<0-4294967295> Packet Differentiated Services Codepoint...
View ArticleEdgeRouter PoE 5 link detection
I have a Arris TM822 Docsis 3 Cable Modem (just bought my new router today). when I plug it in it automatically sets it to a 10/full speed. It should be 1000/full but for some reason it isn't detecting...
View ArticleEdge Router X capability
Good Evening, Noob question here. Thinking of getting an Edge Router X. I need to split my internet access between two properties from the modem: the Residence and the Rental.I want these two...
View Article