Full BGP Tables
Hello, I am trying to setup full bgp tables, but i see its shows default routing only. ubnt@edgerouter:~$ show ip route summaryIP routing table name is Default-IP-Routing-Table(0)IP routing table...
View ArticleSeveral issues with dual WAN load-balancing
Hi, First, here is my test configuration.I use two ER-8 (version 1.8.0) with a symetrical conf :> Eth0 is dedicated to LAN> Eth1 is dedicated to WAN1> Eth2 is dedicated to WAN2I use 2 routers...
View ArticleUnable to redirect to squidGuard-simple.cgi
Hi, My web proxy config is listen-address 192.168.2.2 {}url-filtering {squidguard {auto-update {update-hour 23}block-category adsblock-category malwareblock-category phishingblock-category...
View ArticleConfigure DMZ on ERPOE-5
I tried searching thru forums to find the answer but everyone has a different setup. I am using a ERPOE-5 connected to a cable modem.I used the WAN+2LAN wizard and nothing else.eth0 is contected to a...
View ArticleChanging Uplink Port?
I've got an Edge Router Lite running the newest firmware (1.8.5 I think?). Anyway I was using Eth0 as my uplink and had a switch plugged into Eth1 to other devices connected. Eth2 was setup on a...
View ArticleERLite Firewall Refusing Port Forward Connections Until Reboot
I am having issues with my Edge Router Lite's firewall. Periodically I am unable to connect to devices through forwarded ports. Typically I get a "No route to host" (or similar error message)....
View ArticleEdgeMax Routing Advise
I am planning to have this type of setup and need some advise. 1. eth0 use a WAN port and ppp0e client to make connection to internet2. eth1 (192.168.1.1/27) connect to my asus ac wireless router, lan...
View ArticleNewby with a couple of questions
I just started using the following setup this week: - EdgeRouter lite- EdgeSwitch 24p 250w POE- AP AC Pro Everything is working perfectly, but I would like to tweak a following things. The EdgeRouter...
View Articleaccess device with hard coded ip
I have a LAN setup on an edgerouter pro using 192.168.31.0/24. Unfortunately I have a device on the network that is hard coded to 192.168.1.30 and can't be changed by me. What's the easiest way to...
View ArticleEdge Router Lite hangs up / crashes once a week
Hey there,I noticed a strange issue with one of our ERLites. It is crashing once a week.If the hangup happens, the router doesn't respond any more to ping/ssh/web etc. I just connected a PC for logging...
View ArticlePort Forwarding
I have 2 internal websites runnning at 192.168.11.201 and 192.168.11.202 both are using port 80. I want them to be accessible via one public address x.x.80.2 by using 2 different port address over this...
View ArticleEdgeRouter Pro-8 and Digital Optical Monitoring for SFP
Hi,I have an Edge router PRO-8 with an SFP and I want to check information from that SFP like dbm and more.It will be helpful if I could have Digital Optical Monitoring for the SFP cause the fiber is...
View ArticleMulti WAN - Multi LAN (and Firewall rules) - Am I doing this correctly?
Is anyone able to confirm I have done this the correct way (It does work): I have 4 WAN interfaces each with a different subnet of Public IP's provided by my ISP (eth0, eth1, eth2, eth3) I have 4 LAN...
View ArticleClik here to view.
DHCP relay over VPN
Hi, I am having trouble getting DHCP relay over VPN to work. Below is our topology: The VPN tunnel is up and running which is verified by both ping and tracert by assigning a static IP-address to our...
View Articletraffic analysis on edge router x
i am confused by the ubiquiti documentation.its very frustratingon the changeloghttps://community.ubnt.com/t5/EdgeMAX-Updates-Blog/EdgeMAX-EdgeRouter-software-release-v1-8-5/ba-p/1591710 there is...
View ArticleGoDaddy DNS
So, I have recently purchased an EdgeRouter poe 5port for my home, and updated it to v1.8.5.I am attempting to setup a dmz to host my own small website. I tried following this guide:...
View ArticleVPN L2TP over IPsec Behind a Router
Hey All, I've been struggling for a week to get this tutorial to work for us: https://help.ubnt.com/hc/en-us/articles/204959404-EdgeMAX-Set-up-L2TP-over-IPsec-VPN-server When trying to connect offsite...
View Article# of SSL VPN client tunnel passthroughs
Hi,Wondering how many SSL VPN client tunnels are allowed to pass through the EdgeRouter PoE-5? I only ask because I can't find any documentation noting anything about it and have a client who's router...
View ArticleERL, VPN to SonicWall and 20 minute timeouts
I'm tracing a problem that has me quite perplexed and I'm hoping that someone may have some insight into it. I have an EdgeRouter X 5-port connecting through a VPN to a Sonicwall 220. The VPN looks to...
View Article"I am not a smart man" (Forrest Gump quote). Just need someone to answer my...
Okay, so I don't know much about routers, modems, etc but am trying to learn. I have Google Fiber for internet and recently bought an Amazon Fire stick. I'd like to use a lot of the 3rd party apps...
View Article