Configure ERL as OpenVPN Client via OVPN config file
I have an ERL that I would like to add a second OpenVPN connection as vtun2. The ERL would be the client and I have an OVPN config file. So far ive been unsuccessful. If a OVPN file is selected do the...
View ArticleIs the Cisco 7201 Router Compatible with the new Edgepoint Switch?
Hello, Just wanted to confirm 100% that this router will work with the Edgepoint Switch? Using Fiber to connect. I was informed that "Provided the ubiquity in question takes standard multimode SFP it...
View ArticleUPDATE: DDOS Taking router offline
Update: A DDOS was knocking the router offline. See second post for info and more questions! Running v1.8.5beta2 (Tried 1.8.5 also)I'm havingsporadic connectivity issues. So far I don't see any errors...
View ArticleNano beam management network.
Hello Everyone,Need your help on figuring out the management of Nano Beam devices placed outside of the internal network. Here is my site configuration:Site A:(ISP Modem --> Nano Beam) -->...
View Articleospf failed today.
Out of the blue, the ospf routes failed on our ER-8Pro today. I started getting calls that the customers had no access, yet we could see them. it took a few minutes to realize that there were no ospf...
View ArticleBridge several VLANs to one single bridge
I use EdgeRouter-X on several locations of a mesh network with OTA links, running an olsr deamon on each EdgeRouter. The setup is rather simple: all eth ports are added to a bridge br0, which has a...
View ArticleClik here to view.
ERL and 2+ Unifi AP's
I have a fairly basic setup and recently considered adding a 2nd Unifi AP however am slightly confused on how the eth2 port would work with 2 AP's. I have no managed switch experience so this may be...
View Articlefq_codel throughput Edgerouter Lite
Hey guys, I'm looking to run fq_codel on downstream and upstream. It's a SOHO environment (about 20 devices) with a lot of usenet, torrents, games, netflix, VPN connections, youtube, genral web etc...
View ArticlePPTP vpn
Dear sirWe activate on edge max pptp vpn and work well with a part of device but we have problem with other mobile phone.The error we have is thisMGR: dropped slow initial connectionCan you help to...
View ArticleProblem routing subnet to subnet on same interface with load balancing
Hi To jump straight in: Version - 1.7.0Eth0 - internet 1eth1 - internet 2eth2 - lan - 192.168.2.1/24 eth0/eth1 have load balancing (from the wizard) and it works great. I have some equipment that is...
View ArticleEdgeRouter X, Comcast, Internet Drops Every ~2 Hours
Setup the Router on WAN+2Lan2, Running 1.8 Connected Surfboard Modem Directly to PC,CMD - IpConfig /allCopied: IP / SubNet / Gateway / Mac Address Set above as the router's info (basically The Router...
View ArticleIPSEC Configuration for Private Internet Access
Hello everyone, I have an ERL setup behind an AT&T U-verse modem (double NAT). Everything works fine. The only problem I've noticed is youtube videos have horrible playback. I did some research and...
View ArticleEdgeRouter Lite - Internet with VLAN
Hello All, I bought an EdgeRouter Lite after my Draytek died.So I use the router directly from the fiber connection.My ISP uses VLAN 128, to work, I got this working, but my knowledge of VLAN is very...
View ArticleClik here to view.
Username/Password is said to be incorrect
Hello there everyone First time utilizing the Forum and the first product that I am starting to use: Edgerouter PRO. In the Quick Start Guide it says:Username: ubntPassword: fields But when I enter...
View ArticleEdge Router Lite WAN Load Balancing With Ipsec VPN to Vlan
Hello I have the Edge Router Lite with 2 100mb WAN connections on load balancing everything is working good But i wanted some computers to not use load balancing like my server i have setup extra...
View ArticleClik here to view.
Eth to Eth "forwarding"
Hi everyone, I guess this might be a really simple thing, but I don't know how to call it so I can google it So I have the following setup: - WAN (on eth1)- 2 LAN networks (on say eth3 and eth5)- a...
View ArticleSite-to-site VPN connected but cannot ping
I have connected two ubiquiti edgerouter lite with site to site VPN successful and i can ping from both ends with no issuesrouter#1 - 192.168.199.254router#2 - 10.0.20.1 I then setup a second VPN site...
View ArticleHow to setup public ip with bgp and own asn
Hello, I am new to ubnt, just received today edgerouter 8 I have own ASN and IP Ranges from Apnic. and leased line from transit with bgp session. Configured bgp and its shows established and i am able...
View ArticleCompatibility between ERL and ER Pro Configuration files
Would it be possible to use an existing ERL Configuration file to initially set-up an ER Pro? I suspect so, but wanted to confirm with you folks. Thanks!
View ArticleWAN 2 interface shows as orange but is working....? And idea why?
ngerasimatos@UBNT:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin DownInterface IP Address S/L Description --------- ---------- --- ----------- eth0 192.168.1.1/24 u/u Local...
View Article