Configure for NAT Type 1 on PS4
I’ve been trying to figure out the proper way to configure an Edge Router Lite such that a PlayStation 4 will detect its NAT type as type 1 (completely open). I have followed online guides for enabling...
View ArticleHow to find source of STUN packets coming into ERX?
Background:I have setup a UniFi system at my aunt's house. When I initially started this, I brought just one AP and connected it to a controller I had running on a R-Pi at my house in San Francisco....
View ArticleCan someone running 1.8.5 do a quick CLI command for me?
If you're running EdgeOS 1.8.5, can you please do: vbash -ic "show version" | grep "Build ID:"and tell me what the Build ID for 1.8.5 is? Thanks!
View ArticleEdgemax X Router Works off another router, but not directly
So I have an edgemax X SFP router that I am trying to replace an old Belkin N150 router with. I was able to setup the router directly from my desktop to WAN+2LAN2 so I can do as follows (WAN into ETH0,...
View Article1.9 no space left, funky huge binaries in /tmp
Upgrading 3 ER-POE-5's, 2 successful, one failed with out-of-space error. I find two binary files in /tmp that are hugefile names:edge8yGYRfphpKlYadj file owner : group was www-data : www-data I don't...
View ArticleIPv6 and SOHO address space
Hello, How do you all manage internal network name resolution and assignment in IPv6 only environment with the SLAAC assigned addresses? Is everyone using ULA + dhcpv6 to run dual IPv6 to maintain...
View Article6 months out of an edgerouter POE?
My er5poe died today. Had it for 6 months. It was on conditioned ac power in an actively cooled cabinet. it stopped giving power to my POE devices and was inaccessible via console or TCP/IP....
View ArticleVPN can't ping server name
Good Evening, I have PPTP setup on my Edgerouter 3-Lite and it connects perfectly with the local user, I even get our DNS Server as DNS IP (configured in PPTP setup as the requested DNS server), I have...
View ArticleClik here to view.
EdgeRouter X, 2 Wan, 4 VLAN , issue
Hi alli have a EdgeRouter X, and i used the wizard of load balancing eth0 and eth1 with failover, and eth2,3,4 are in switch0.I made 3 additional VLANs of 30/40/50 and corresponding subnets. no...
View Article3 wan 2 failover
Possible for Edgemax to have this?eth1 = isp1eth2 = isp2eth3 = isp3eth0 = lan eth0 = primary internet is eth1,if eth1 has no internet failover to eth2,if eth1 and eth2 has no internet failover to eth3
View ArticleODD problem with simple WAN/2LAN config on EdgeRouter Lite 3 Port Ubiquiti...
I pulled a simple config file off the smallnetwork builder site here:http://www.smallnetbuilder.com/lanwan/lanwan-howto/32014-how-to-configure-your-ubiquiti-edgerouter-liteDownloaded to router config...
View ArticleIPSec site-to-site UI won't accept hostnames for peer address in version 1.9
I have a pair of Edgerouter X's updated to 1.9. Using the UI, I have been able to establish a working IPSec tunnel between them if I enter IP addresses in the "Peer" text box. However if I switch to...
View ArticleEdgeRouter Lite 3 - Slow WAN Speeds
I apologize in advance as I am not very network savvy. ER Lite 3 has been running very well for a few months now on v1.9.0 until this evening.It is a very basic setup with eth0 as WAN, eth1 as LAN. No...
View ArticleStrangely Odd problem with simple WAN/2LAN config on EdgeRouter Lite 3Port...
I pulled a simple config file off the smallnetwork builder site here:http://www.smallnetbuilder.com/lanwan/lanwan-howto/32014-how-to-configure-your-ubiquiti-edgerouter-liteDownloaded to router config...
View Article1.9.0 dnsmasq cannot start when use-dnsmasq on dhcp with CIDR not in 8,16,24
I try to let dnsmasq take over all dhcp requests, but if I set domain-name in dhcp subnet, dnsmasq says syntax error. Tried on both erl and erx, 1.9.0. Here is my dhcp config: show service dhcp-server...
View ArticleER-8 PPPoE with VLAN-Tag
Hi, I´ve tried to setup an ER-8 and running into an PADO-Timeout. After some researching it turns out, that our ISP expect a VLAN-Tag within the PPPoE (Telekom Fibre 200). For that I add the VLAN Tag...
View ArticleVPN Fortinet and EdgeRouter Lite v1.9.0
Hello team,I'm new with Ubiquity device, i try to find some documentations or tutorial on internet but i didn't find the solution yet.I have a problem to configure an IPSEC VPN between a EdgeRouter...
View ArticleEdgeRouter DNS different than DHCP DNS?
Simply put, I use OpenDNS DNS servers setup in DHCP and have Dynamic DNS for my home web filtering. All my DHCP clients receive 208.67.222.222 as DNS. I set my file server up a few weeks ago with...
View Articleun-natted packets being sent out the WAN interface
I'm using an ER-Lite running 1.9.0 with dual uplinks and using vlan-tagged interfaces facing the clients. My ISP is extremely sensitive to spoofed packets and ONT will block ALL traffic for 5 minutes...
View ArticleSimple QoS, still stuck
Ok, every thread I find about QoS talks about setting bandwidth limits. But that only helps so much?I want to achieve low-latency for:1. My PS42. My workstation computer Something like this one I used...
View Article