VLAN Questions,again, and again
Hello world I've crawled the forum, but nothing popped out. The ERL manual and EdgeOS manual neither.I've set a VLAN2 interface on the ETH1, and the DHCP server for it.I continue testing different...
View ArticleDDoS Attack and default passwords
A note of caution, please, please change the default ubnt password of your devices.As the press reported, the attack against DYN.com name servers on Friday were the result of a DDoS attack named Mirai....
View ArticleMTU stuck on 1500 even on v1.9
Hi all, New Ubiquiti customer and user here trying to configure a trio of EdgeRouter X As part of the proof of concept I'm setting up I'll need MTU of at least 1600. I can configure this in the Ubnt...
View ArticleIPsec site-to-site load balancing ?
Dear all, I would like to know if there is a possibility to do some load balancing between site to site IPsec tunnels ? Here is my scenario : I would like to install an ER8-Pro in a remote office and...
View ArticleErl-3 to ER-5-POE over a PtP link Routing issues
I have somewhat of a complicated situation where I have my internet coming in to one building, with servers at that location, and then beaming a connection PtP to another building. I have the link...
View Articleset one of my lan to be vpn l2tp client
I wanna know if this is possible. I want my primary lan to be accessing the internet normally. On the other hand, i wanna setup my second lan to connect to an l2tp vpn server. Is this possible to do on...
View Articlepppoe or ?
I am in the process of setting up a small WISP and would like some input on how to avoid double NAT for my customers. I have multiple customers who would like to reach internal devices. I am a bit...
View ArticleEnabling dhcpv6-pd pd on openvpn breaks ipv6 for LAN
With all the helpful posts I've managed to get everything working with my current provider XS4ALL.nl however, there is this one thing i just can't get my head around. IPv6 works like a charm on the LAN...
View ArticleNot receiving IP from ISP using dhcp on eth0 (Edgerouter Lite and D-Link...
Hi, I have setup the Edgerouter Lite using the standard wizard where eth0 is connected to a bridged 4G modem (D-Link DWR-923), eth1 and eth2 are local LAN's. The problem is that I don't get any IP...
View ArticleVPN Clients and Multicast
Hi, I have enabled L2TP w/IPSec VPN on my Edgerouter X. My VPN clients are able to succesfully connect and see other hosts on the remote network but the VPN clients cannot communicate to the multicast...
View ArticleEdgeRouter v1.9 IPSec Traffic Firewall
Hello,I have a IPSec vpn setup (and working) but I need to filter traffic going across it. I can filter the outbound traffic by using a firewall policy on my outbound wan port (eth0/out). But how do I...
View ArticleTrying to setup Multi WAN with one way failover in combination with Multi VLANs
I am facing a new problem, and am not really able yet to wrap my head around it.I am running on a EdgeRouter POE-8.Current situation is a VDSL connection, connected to eth1.eth1 receives an IP through...
View ArticleClik here to view.
EdgeMax, Edge OS : Fail To Apply the configuration
As mention above, I upgrade the firmware to latest firmware for my ER device. I have lots of vlan and port forwarding i need to do, + VPN as well, but whenever i done with my setup i have this issue....
View ArticleIP route Table VRF, limit on Vlans?
I noticed that when I type the command "show ip route" the screen only shows 5 out of my 6 VLANS. If I go to the mising Vlan on the GUI, select config then save without changing anything. The vlan...
View ArticleTime based firewall rules & force DNS to specific subnet
Hi..I haveeth0 192.168.1.0/27eth1 pppoeeth2 192.168.2.0/27eth3 192.168.3.0/24 (DHCP enable)I want to make 192.168.3.0/24 internet connection available on 6 AM to 14PM only.And I want to force every...
View Articlesquid vs ERx
Hi I would like to know if someone's using squidguard on ERx. if not, how can you protect your children ? regards
View ArticleEdgeMAX as switch with VLAN
#Hi.I am trying to configure the router as a switch with VLAN on all ports. One trunk and the rest pvid. This is not a problem, seems to work fine.But I am having troubles accessing the router via the...
View ArticleWife-Enabled Kids Access App for EdgeRouter
Howdy Fellow Ubiquiters, I've been using an Edgerouter for a couple of years now quite happily. Recently the Wife asked if there was a way she could easily enable or disable the Kids Internet Access....
View ArticleUnifi Controller in DHCP Leases.
I'm using the edgerouter lite and UAP unifi AP point. The Unifi is connected to a switch that is connected to the router.I'm currently controlling the AP using an unraid docker running the Controller...
View ArticleEdgeRouter Lite: no WAN access due to ISP's DHCP returning /32 for WAN IP and...
Hi,I'm struggling to setup my EdgeRouter Lite that won't allow me internet access due to /32 IP and default router addresses.Here's the situation:My ISP delivers (through DHCP) the following to the...
View Article