Hello world
I've crawled the forum, but nothing popped out. The ERL manual and EdgeOS manual neither.
I've set a VLAN2 interface on the ETH1, and the DHCP server for it.
I continue testing different configs, but please, if someone could help me on a few points:
Can we add a VLAN interface to a bridge, or just a single interface? I'm using the ERL with the WAN + 2LAN config, VLAN2 will be present on both ETH1 and ETH2 interfaces, must I set a new VLAN2 inteface on each ETH1 and ETH2, or can I use VLAN2 on Br0? (Br0 is ETH1 and ETH2 bridged)
That a VLAN aware switch is mandatory for tagging with the ERL? I've got a port (ETH1) with ONLY VLAN2 devices on it, and nothing is joining the VLAN, everything remains on the base/main network. can the ERL tag? Or do I have to use something like an ER-X or a smart switch between the devices and the ERL?
Thank you for your help
