HTTPoxy - ERL vulnerable?
Hello all We use Trustwave to monitor for PCI compliance - and as of this week it is now failing stating we are vulnerable for HTTPOXY on port 80 - however, it's ONLY failing us at sites where an Edge...
View ArticleDHCP from provider fails, manual refresh fixes it
Edgerouter Pro - v.1.9.0Set up with the standard wizard WAN+2LAN2 & IPv6 enabled. I'm loosing my DHCP IPv4 adres every few hours. Hitting the refresh button solves it.Any idea what could be the...
View ArticleDNAT example
I want to be able to access a phone gui from the outside and limit by source address. I have three phones so I want to use a different port for each phone. Here is an example that does not work....
View ArticleIPSEC traffic not working
Hello,I am trying to build a isolation network with the EdgeRouter series and was wondering if this is possible at this point. I have attached the configs and a diagram of what I am trying. Right...
View Article8 port EdgeRouter suitability as webproxy for 200 users
We are considering purchasing an 8 port EdgeRouter to place between our WAN router and our internal network. This would provide a firewall, VPN for a few external users, and a webproxy to block...
View ArticleBasic setup
Hi there, I'm an ERL newbie with Windows10 networking problem, my ERL is setup with the Basic Setup Wizard and I've cant access internet with anything, on the inside. I've can browse and access every...
View ArticleL2TP VPN configuration error: IPsec did not start.
Trying to set things up with the guide here. https://help.ubnt.com/hc/en-us/articles/204950294-EdgeMAX-L2TP-Server I get all the info in and then get this error. It won't let me commit, and when...
View ArticleEP-R6 to EP-R6 speed test cant get over 199Mbps
I have two EP-R6's connected via ethernet port with static ips. When i do the bandwith test i cannot get over 199Mbps at all. Cable tests fine and i was wondering if maybe i missed a setting or something.
View ArticleERLite-3 performance/setup
Upgraded (?) our ERLite-3 to 1.9.0 and immediately started seeing VPN disconnects when using remote access. Often, it would reconnect within 5-10 seconds with no action on my part, but - of course -...
View ArticleUpgrade to 1.9.0 - No Realtime Data
Hello, After upgrading today to 1.9.0 from 1.8.0, the dashboard no longer lists any live connection data. As well, the display in the top portion of the screen showing which ports are currently...
View ArticleEdgeRoute Lite - Dead?
I came home tonight, no interent. Unplugged the EdgeRouter Lite, nothing. Tried to connect to the Web UI, nothing. So I did a factory reset using the reset button. Now I have it connected via enet to...
View ArticleEdgeRouter Lite and VPN IPSec
Hello!Im not able to configure VPN connection for my iOS devices using IPSec.I have followed this...
View ArticleMy PPTP VPN setup to privateinternetaccess.com
If anybody is interested, I made a small guide about how to set up a VPN tunnel to privateinternetaccess.com. But of course this guide could be used for any other VPN provider that supports PPTP....
View ArticleBricked ERPro-8
This i now my third edgerouter that got bricked, i had two erl before with same symptom and now a erpro-8. The first erl i didnt get changed by rma even though ubiquiti knows its a hardware issue with...
View ArticleClik here to view.
EdgeRouter and SNI
Hi, does any of the EdgeRouters support SNI (server name indication).I alredy have a server listening on 443 for https and now i want to configure SSTP VPN (443) on another server.. i need something in...
View ArticleConfig Optimization
So I've just purchased and installed an ERLite3 at our office and I've managed to get the internet connection up and running. I would like to share my configuration file for you guys to review and...
View ArticleBricked ERLite-3
Yesterday following a power failure, my 3-year-old ERLite-3 failed to restart. When powered up, the green LED on the Console port blinks slowly, nothing else. -There is no output on the serial console...
View ArticleClik here to view.
ERX+UAP-AC+VLANs....I'm at my knowledge limit
After much trial and tribulation I'm looking towards the experts who hopefully might be able to help me in my predicament. Here's what I have:1 x ER-X1 x UAP-AC-LR1 x TP-Link 8 port Smart switch1 x...
View ArticleER-8 Remote Web Login
Hi all, I'm new to edge routers, I would like to be able to login to the router from another location. Please explain step by step how to set it in the router. Thanks in advanced.
View ArticleClik here to view.
L2TP issues on ERX, v1.9
I've setup an ERX for a customer with local authentication and it seemed to work.Later today I got a message from the customer that they have tried to access their office from their home and the...
View Article