Hi there, I'm an ERL newbie with Windows10 networking problem, my ERL is setup with the Basic Setup Wizard and I've cant access internet with anything, on the inside. I've can browse and access every NAS, PC and printers but no internet. Cant access the GUI but can ping the router. This should really be working! Every machine inside have i'ts IP adress from the ERL DHCP server vith correct settngs, the router as gateway and DNS server so why? Config below, can someone please tell me what is going on? Thank´s!
$ show configuration
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
:
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address dhcp
description Internet
duplex auto
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
speed auto
}
ethernet eth1 {
address 192.168.1.1/24
description Local
duplex auto
speed auto
}
ethernet eth2 {
address 192.168.2.1/24
description "Local 2"
disable
duplex auto
speed auto
}
loopback lo {
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN1 {
authoritative enable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.38 {
stop 192.168.1.243
}
}
}
shared-network-name LAN2 {
authoritative enable
disable
subnet 192.168.2.0/24 {
default-router 192.168.2.1
dns-server 192.168.2.1
lease 86400
start 192.168.2.38 {
stop 192.168.2.243
}
}
}
use-dnsmasq disable
}
dns {
forwarding {
cache-size 500
listen-on eth1
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5010 {
description "masquerade for WAN"
outbound-interface eth0
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
ubnt-discover {
disable
}
}
system {
host-name tmtwall
login {
user admin {
authentication {
encrypted-password ****************
}
level admin
}
}
name-server 213.80.98.2
name-server 213.80.101.3
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
traffic-analysis {
dpi enable
export enable
}