EdgeRouter Lite. Network Configuration, Ping across subnets on eth1 and eth2
Hello, I'm drawing a blank as to what I've missed. Its been a long Monday as it is. The set up is as below: EdgeRouter LiteEth0-WANEth1-LAN1Eth2-3rd Party VPN On dedicated ISP (Lan2) Lan1 Network...
View ArticleIPv6: Only one out of four DHCPV6-PD working
Hi, I've got a fixed IPv6 /56 subnet assigned by my ISP, with a 8 bit prefix this gives me (theoretically) 256 subnets. I have 4 interfaces on the LAN side on my ER: eth0eth0.15eth0.16eth0.32To assign...
View ArticleIPSEC Site-to-Site with Multi-WAN failover - LAN cannot traverse VPN tunnel
I just deployed an ERL to a customer site with Multi-WAN failover, and it's been working great. I used the Wizard to setup, checking eth1 as failover-only. After we confirmed internet was working I...
View ArticleCan the EdgeRouter X be used with the XR9?
i am trying to set an Access Point for guest users who need a voucher but not necesserely. currently i have a UAP outdoor+ with the 2.4Ghz. i'd like to use the XR9 because it's a900mhz, if i use the...
View ArticleConnection issues with ER-X v1.9.0
I loaded an ER-X with v1.9.0 and switched over to using it instead of a Netgear router. Ever since I switched over to the ER-X with 1.9.0, every time I try to play any videos on YouTube, Apple TV...
View ArticleClik here to view.
ER-X Site-to-Site with SoincWALL suddenly not working?
I have na ER-X 1.9.0 (was on 1.8.0 when symptoms started). I have a home DHCP'd WAN connection via Comcast with my own Surfboard modem and ER-X hooked up at home, and I run a IPsec Site-to-Site to a...
View ArticleIpsec NAT IP Address and Subnet
We have a vendor with a fortigate FW that needs VPN access, we have to NAT our end because they have another client with the same IP scope with VPN access already (not surprised).Running 1.8.5 what is...
View ArticleCannot connect to OpenVPN on ERL
I recently set up OpenVPN my ERL with v1.9 firmware. Here is my OpenVPN setup: openvpn vtun0 { description OpenVPN encryption aes256 hash sha256 mode server openvpn-option "--push redirect-gateway"...
View ArticleWeb filtering on edge max
1. as we had already blocked all users on the network to access internet i want them to be able to to send emails that means they should access "earoofing.co.ug"i have proceeded to config tree1. under...
View ArticleBandwidth controlling
Hey everyone, So I have a client requesting a specific device to have dedicated bandwidth from WAN of 20Mbps up/down. now I know this is possible I am just struggling to find the settings, I have had a...
View ArticleClik here to view.
Ipsec vpn between Edgerouter and Draytek 2960
I try to setup an Ipsec vpn between and Draytek 2960 and my own ER-lite.Both modems are set in bridge mode. My edgerouter is running the 1.9 firmware. A vpn to another Edgerouter works fine. There is a...
View ArticleWhich Product? Edgerouter or USG
Hi All, I am looking to change my old Draytek 2850 router to either the Edgerouter or USG. My main question is which one? I need to be able to use my 5 Static IP addresses my ISP have given me,...
View ArticleMulticast over vti ipsec tunnel. (How to??)
Cannot get my client to join the multicast.i have the multicast perfect running in the main end.
View ArticleClik here to view.
VPN Tunnel Down
Hi, I am running IPsec Site to Site on Edgerouter Lite, it was working fine until I changed the WAN port from DHCP Static to PPPoE. Both sides have no settings changed other than the WAN port from DHCP...
View ArticleClik here to view.
1WAN used instead of combination of other WAN (Load Balancing)
Hi guys, Im using ERPoe5. I just solve load balancing issue for 4WAN 1LAN. How i want to know if the load balance is working well? as you can see. only eth2 color is being used. Is this because of...
View ArticleL2TP VPN help needed
Hi All,I am needing to setup a L2TP VPN as my iphone and mac no longer have pptp support built in. (apple took it away) I am trying to setup a L2TP VPN and I am unable to get it to work.I am unsure...
View Articletraceroute shows * * * at first hop
I am new to Ubiquity Hardware, everything we have is ubiquity however, Router , Switches, AP'sI have Edge MAx Pro 8Ubiquity 750 and 1 Edge Lite Switch.traceroute hangs at first hop. (ping on by...
View ArticleSource NAT issue HTTP works but no icmp
I'm using source and destination NAT in my configuration. I'm encountering an unpredictable problem. Situation: PC1 ----> EdgeRouter ER-8 (V1.9.0) ----> OpenVPN server ----> PC2 PC1:...
View ArticleBest modem to use with EdgeRouter
Hi I have just purchased a EdgeRouter. I have a adsl connection and currentlly use a draytek 2860. I think the draytek will be overkill to use just for an adsl modem. What is the best adsl modem that...
View ArticleER-X dual WAN
Can the ER-X handle 2 WAN to 1 LAN, using WAN2 as failover only or do I need to use a higher model ER?
View Article