EdgeRouter-X OpenVPN for PIA - Having trouble setting up...
I’ve been trying to setup my erx as an open vpn client connected to private internet access’s service. I’ve followed this guide (linked here) and am stuck at a point at which I cannot figure how to...
View ArticleVpn to access router
Can someone explain to me in detail how to setup Vpn so i can access my edge sfp router outside my network. Thank you!!!
View ArticleClik here to view.
2 WAN Load Balancing and Shibboleth, oh boy!
Hi all, We've installed a nice setup with around 37 unifi ap's and some toughswitches connected to a Edgerouter which is load balancing two wan links at 50%. It all works great! Yihaaa! big speeds! 2 x...
View ArticleFirewall settings don't seem to work
I know the question has been asked many time about isolating subnets. I've followed the advice given and still can't seem to isolate my LAN from my IoT. I have an EdgeRouter X configured with WAN+2LAN2...
View ArticleRouter available on one interface but not others
I'm brand new to Ubiquiti, starting with an EdgeRouter PoE. Apologies if this is something super stupid that I'm just not getting. My switch0 is set to 192.168.10.1 with appropriate NAT/DHCP set up and...
View ArticleHow Can i use My Domain dhcp server with Edgerouter Max
Hi i have a domain server that i would like to use a my dhcp server but am still unable to figure that out could some please shed some light on the same its a local domain server
View Articlel2tp VPN instant disconnect.
Hi all. Just bought a ER8 to use in a small office setup. One of the requierments is to be able to connect from the outside via VPN. I configured a L2TP/IPSEC service with preshared key on the router...
View Articleedgemax poe setup wan port static ip and a 2 lan and 2 unifi pro acesspoints.
*edit(updated information) - [solved ]Upgrading firmware - After alot of effort i managed to upgrade to latest firmware. (for some reason i had a conflict that it didnt want to upgrade firmware when i...
View ArticleHelp choosing and configuring a VPN
First off my skills in advanced networking are somewhere between beginner and intermediate, speak slowly please. I work for a AV automation company and we use EdgeRouter Lites, EdgeRouter PoEs and...
View ArticleStruggling with Port Forward and a Source address
Trying to allow access to my cloud key (192.168.1.5:8443) from outside the office I have successfully done this through the port forward wizard but want to lock it down to a couple IP addresses. I have...
View Articleipv6 internal traffic gets filtered
ERL v1.9.0 I did some traceroute as shown bellow and sure ennough the Internal network is not responding.root@stargate:~# \traceroute6 -i eth0 google.com traceroute to google.com...
View ArticleCan I setup both DHCPv6 and SLAAC on the same interface?
I've got IPv6 running with SLAAC on my home network DHCPv6 over PPPoE), but I'd like to set it up with some local services that always have the same internal domain name. To do this it looks like I...
View ArticleIPTV setup help
Hi, I've recently got an EdgeRouter X to accompany a Unifi AP as the BT HomeHub is utter rubbish constantly using the same channel as my neighbours etc; anywho I thought I had an old edgerouter lite...
View ArticleXbox One Port Forwarding 2+ Xbox's
I've seen this... configure set service upnp2 listen-on eth1 set service upnp2 nat-pmp enable set service upnp2 secure-mode enable set service upnp2 wan eth0 set service upnp2 acl rule 10 action deny...
View ArticleIssue connecting gui over VPN (was working)
I'm having a very odd issue. I am running 1.9.0 on an EdgeRouter X. I have L2TP over IPSec VPN setup and it has worked great for a long time. Suddenly about mid last week when I connect to VPN I'm...
View ArticleVLAN configuration, firewall rules, basics
Greetings all, I have been experimenting with some VLANs. I have a POE5, and a UNIFI PRO AC AP, both with up to date software, the Edgerouter is simply configured with the wizard. My question is more...
View ArticleERL firmware upgrade via CLI error message
Currently running v1.7 I have tried the v190 link with and without the trailing hash tag. I get this error: :~$ add system image...
View ArticleStatic Host DNS Sometimes not working on MacOS
I have set up an ERL at home with 4 VLANs configured and a zone-based firewall. I run a 'Split-Horizon' DNS system so that when I'm at home, my mobile devices connect to network services like my mail...
View ArticleInspect offloaded packets
We have a set up that we have been experiencing problems with for more than a year. We have found a work around to the issue that 'fixes' it by turning off "offloading ipv4 forwarding". When the...
View ArticleClik here to view.
Abnormal DNS retried or failed, strange Firewall config. (ERP 1.9)
Hello everyone, this is my first message so please be nice! i've already tried to help some here in the past. My setup is: 1- Edge Router Pro with 2 main internet links (120 down / 10 up each) and one...
View Article