*edit
(updated information)
- [solved ]Upgrading firmware - After alot of effort i managed to upgrade to latest firmware. (for some reason i had a conflict that it didnt want to upgrade firmware when i had a local adress 192.168.1.5 connected to the edgerouter and aswell a wifi that was connected to the internet closing the wifi made it possible to upgrade the firmware)
- Using the wizard WAN+2LAN2 Wizard - i tried to setup a WAN port (Eth1 per default) and on Eth0 its Lan 1 192.168.1.1 and Eth2-3-4 is Lan2 (192.198.2.1).
it worked when i had a cable on Eth0 direct to computer and i could acess internet. DHCP for Lan1 but couldnt change cable to Lan 2 and get an ip or connect to internet.
What i am trying to do is following.
- Wanport (have a static ip adress from ISP) "Eth1"
-Lan 1 (Only connect via cable and need dhcp cause 3 clients will be in this Lan) "Eth0"
- Lan 2 connect via cable and WiFi using 2 x Unifi UPA-Pro "Eth2 for cable" and " Eth3 and Eth4 for UAP-Pro with PoE"