I have 2 edgerouters and I am trying to connect them with a vpn
Router 1 was setup using LoadBalancing wizard and
Eth0= 10.10.10.173/29 (connected to bridged modem(want vpn to go through here)
Eth1= 10.10.10.109/29 (connected to second modem(just for extra browsing speed, not needed for vpn)
Eth2= 192.168.0.253/24 (LAN DHCP allocation 192.168.0.21-240)
Router 2 config is=
Eth0=192.168.1.1/24 (LAN DHCP allocation 192.168.1.21-240)
Eth1=12.12.12.50/24
Eth2=not used
Eth1 is connected to a dmz (voip) and should pass all traffic that isn’t voip through it.
Router 2 has a default gateway of 12.12.12.1 and its Public IP that it and the dmz both get are 10.10.10.105. the remote management configuration works so it does pass through something just having issues with passing vpn so that is why we tried to do vpn.domain.com entry stuff.
Any dns entry that is “vpn.domain.com” = 10.10.10.105
Config of both routers and picture of connections are attached.
If any body could assist in getting ipsec connected because right now i get
0 active ipsec tunnels
and also if you could put in firewall entries to be able to pass traffic between the 192.168.0.0 and 192.168.1.0 networks that would help as well because even after i connect router 1 to a edgerouter that isnt connect through dmz i still cant ping between lans similar to this issue https://community.ubnt.com/t5/EdgeMAX/IPSEC-VPN-Site-to-Site-NOT-Working-using-sample-config/td-p/626677
