Looking for some help for a newbie. I have one last device to get working on my setup. I have setup one Vlan on my system for a couple of devices. I have the EdgeRouter 5 poe with 1.8 firmware. I plug my Gateway for my garage door into the port for Vlan # and it does not connect to their server but does get an IP address. When I plug the same gateway into another port which is on the basic Firewall rules, WAN_IN, WAN_LOCAL everything works just like that. I have tried to copy those configs for this VLAN # and set the interface to IN and LOCAL as well but nothing works. So not sure if I need outbound which I have tried also. Basically, I have tried too many things and have confused myself.
Also, when I plug my computer into the VLAN # port it gets the correct IP address range and can surf the internet and acts like I would expect it.
I called the company and they gave me a list of ports to open - I have setup firewall rules to allow for those ports with no success. So I am missing something. I have another wireless device in the same VLAN # and have setup to open ports for that unit and that is working. Any help would be great.
I also am using GUI to manage these at this moment.
Thanks for any advice.